Issue |
EPJ Web Conf.
Volume 288, 2023
ANIMMA 2023 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
|
|
---|---|---|
Article Number | 06010 | |
Number of page(s) | 5 | |
Section | Nuclear Safeguards, Homeland Security and CBRN | |
DOI | https://doi.org/10.1051/epjconf/202328806010 | |
Published online | 21 November 2023 |
https://doi.org/10.1051/epjconf/202328806010
Pulse shape discrimination of CLYC, CLLBC and EJ-276 with SiPM readout
SUPA School of Physics and Astronomy, University of Glasgow, Glasgow G12 8QQ, U.K.
Published online: 21 November 2023
Solid state detectors for the detection of thermal and fast neutrons find widespread applications. They often operate in a high gamma-radiation field or are required to discriminate between gamma-radiation and neutrons. Organic and in-organic scintillation materials are proposed as detector materials. These materials often exhibit different pulse shapes in their light output, which allows a variety of pulse shape analysis (PSA) techniques to be used to distinguish the two species of radiation. The current maturity of silicon based single photon counters (SiPM) provides a viable visible photon detector alternative to conventional vacuum based photo multiplier tubes (PMT). However, their impact on PSA has not been deeply studied. Three solid state scintillation materials, CLYC, CLLBC and EJ-276 are coupled to an array of SiPM and exposed to neutron and gamma radiation. Their response is characterized using a variety of PSA algorithms and quantified in a Figure of Merit. Conventional charge comparison algorithms perform well for all materials, while a Fourier component analysis shows particular strength for the in-organic materials tested.
Key words: neutron detection / pulse shape analysis / SiPM / Fourier analysis / scintillation detectors
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.