| Issue |
EPJ Web Conf.
Volume 309, 2024
EOS Annual Meeting (EOSAM 2024)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 3- Optical System Design, Tolerancing and Manufacturing | |
| DOI | https://doi.org/10.1051/epjconf/202430903007 | |
| Published online | 31 October 2024 | |
https://doi.org/10.1051/epjconf/202430903007
Beam shaping elements for single photon sources based on 3D printed micro-optics
Institute of Applied Optics (ITO), University of Stuttgart, Germany
* Corresponding author: jimenez@ito.uni-stuttgart.de
Published online: 31 October 2024
Multiple researchers have explored the use of 3D printed micro-optical components as interfaces to quantum point emitters by considering different designs and configurations. Typically, these designs involve parametric structures optimized in combination with idealized point source models following the principles of imaging optics. In this work, we propose a different approach based on the use of well-known numerical routines developed in the field of illumination optics. We compare the obtained design to reference parametric 3D printed based interfaces, which have been used in the context of 3D printed micro-optical interfaces to single photon sources.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.