| Issue |
EPJ Web Conf.
Volume 309, 2024
EOS Annual Meeting (EOSAM 2024)
|
|
|---|---|---|
| Article Number | 09005 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 9- Opto-Electronics, Nanotechnologies & Microsystem | |
| DOI | https://doi.org/10.1051/epjconf/202430909005 | |
| Published online | 31 October 2024 | |
https://doi.org/10.1051/epjconf/202430909005
Infrared and conductive properties of TCO films deposited by magnetron sputtering at different temperatures
1 Industrial Engineering Department, University of Napoli “Federico II”, 80126 Napoli, Italy
2 National Research Council of Italy, Napoli Unit, Institute of Applied Sciences and Intelligent Systems, 80131 Napoli, Italy
3 Physics Department, University of Napoli “Federico II”, 80126 Napoli, Italy
4 Swiss Federal Institute of Technology (EPFL), 1015 Lausanne, Switzerland
* Corresponding author: annalisa.dinapoli@unina.it
Published online: 31 October 2024
Low-emissive Transparent Conductive Oxide (TCO) coatings, such as Indium Tin Oxide (ITO) films, can be used to reduce radiative losses that affect Hybrid photovoltaic-thermal (PV-T) devices. This work shows the optical properties of ITO deposited by magnetron sputtering on a glass substrate with and without thermal heat treatment at different temperatures. All the analyses conducted include UV-VIS and infrared regions, up to 20 μm.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.