| Issue |
EPJ Web Conf.
Volume 309, 2024
EOS Annual Meeting (EOSAM 2024)
|
|
|---|---|---|
| Article Number | 12008 | |
| Number of page(s) | 2 | |
| Section | Focused Sessions (FS) 2- Optical Fibers Technology | |
| DOI | https://doi.org/10.1051/epjconf/202430912008 | |
| Published online | 31 October 2024 | |
https://doi.org/10.1051/epjconf/202430912008
Rapid and non-destructive nanofiber diameter measurement using Spontaneous Four Wave Mixing
1 Université Paris-Saclay, Institut d’Optique Graduate School, Centre National de la Recherche Scientifique, Laboratoire Charles Fabry (LCF), 91127 Palaiseau, France
2 Université Paris-Saclay, Centre National de la Recherche Scientifique, Centre de nanosciences et de nanotechnologies (C2N), 91127 Palaiseau, France
* Corresponding author: Sylvie.Lebrun@institutoptique.fr
Published online: 31 October 2024
We will present a rapid and non-destructive technique for the measurement of the mean diameter of a silica nanofiber using the wavelength position of the signal peak in a spontaneous four wave mixing experiment. The nanofiber diameter can be characterized in a range going at least from 650 to 1250nm. Several nanofibers were characterized, and the measured diameter show a good accordance with the one obtained using a Scanning Electron Microscope. The technique is simple to use and has even the potential to be implemented in situ in order to realize a diameter measurement during the pulling of the nanofiber for a better control of the final diameter of the nanofiber.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.