| Issue |
EPJ Web Conf.
Volume 320, 2025
20th International Conference on Calorimetry in Particle Physics (CALOR 2024)
|
|
|---|---|---|
| Article Number | 00033 | |
| Number of page(s) | 3 | |
| DOI | https://doi.org/10.1051/epjconf/202532000033 | |
| Published online | 07 March 2025 | |
https://doi.org/10.1051/epjconf/202532000033
Recent operation status of Belle II electromagnetic calorimeter and relevant systems
1 Department of Physics, Nara Women’s University
2 Institute of Particle and Nuclear Studies, High Energy Accelerator research organization (KEK).
Published online: 7 March 2025
The electromagnetic calorimeter of Belle II experiment consists of the 8736 CsI(Tl) crystals with their PIN-photodiode readout. Those detector hardware components have been inherited from the Belle experiment. In order for high rate capability and immunity against high beam background, waveform sampling readout with digital signal processing is introduced into the frontend electronics, the ShaperDSP boards. At the beginning of Belle II experiment, the COPPER system was used to receive the digitized signal output from the ShaperDSP boards, and now it is replaced by the PCIe40 system for higher throughput and maintainability. We report recent status of the Belle II electromagnetic calorimeter system including its peripheral system such as the online luminosity monitor.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.