| Issue |
EPJ Web Conf.
Volume 321, 2025
VII International Conference on Applied Physics, Information Technologies and Engineering (APITECH-VII-2025)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 8 | |
| Section | Condensed Matter Physics, Materials Science, and Nanoscale Phenomena | |
| DOI | https://doi.org/10.1051/epjconf/202532102002 | |
| Published online | 10 March 2025 | |
https://doi.org/10.1051/epjconf/202532102002
Microwave field effects on internal stresses in additively manufactured polymer composites
1 Saratov State Technical University named after Yuri Gagarin, Saratov, Russia
2 National Research Center “Kurchatov Institute”, Moscow, Russia
* Corresponding author: irinka_7_@mail.ru
Published online: 10 March 2025
Studies have been conducted on the influence of microwave electromagnetic fields on the magnitude of internal stresses in cured carbon fiber, glass fiber, and organic plastics, as well as unidirectional composites obtained by FDM technology from PEEK thermoplastic reinforced with continuous carbon fiber. A reduction in internal stresses as a result of microwave exposure was established, averaging 9%, 6.5%, 6%, and 5.4% for carbon fiber, glass fiber, organic plastics, and unidirectional reinforced PEEK, respectively. The reduction in internal stresses is small in value and is a concomitant effect; however, in the context of a certain increase in the safety factor and, consequently, the reliability of products made from polymer composite materials, it can be considered as another argument for the practical application of microwave technologies in the production of PCM products.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.