| Issue |
EPJ Web Conf.
Volume 321, 2025
VII International Conference on Applied Physics, Information Technologies and Engineering (APITECH-VII-2025)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 9 | |
| Section | Condensed Matter Physics, Materials Science, and Nanoscale Phenomena | |
| DOI | https://doi.org/10.1051/epjconf/202532102005 | |
| Published online | 10 March 2025 | |
https://doi.org/10.1051/epjconf/202532102005
Mechanical properties of thermoelastoplasts for hoses of improved wear resistance
1 Federal State Budget Educational Institution of Higher Education, MIREA – Russian Technological University, Moscow, Russia
2 Institute of Design-Technology Information Science of Russian Academy of Sciences, Moscow, Russia
* Corresponding author: muranovalecs@mail.ru
Published online: 10 March 2025
Peristaltic pump units are used in medicine, for pumping blood and its components, and in mechanical engineering for working with aggressive media. The only element in this pump that comes into contact with the working medium is the hose. Such hose characteristics as chemical resistance and wear resistance directly affect the operating life of the entire pump. The purpose of this work is to increase the service life of the peristaltic pump unit by developing a hose with improved wear resistance (WRH). During the study, the following problems were solved: the process of obtaining 3 different polymer materials for the manufacture of WRHs was selected, the technology for manufacturing WRHs was selected, and the mechanical properties of the resulting structure were studied. As a result, it was determined that all selected materials and design were workable, however, a sample made of ethylene-propylene rubber (EPDM) and polypropylene (PP) with a mass percentage of 75/25 (75% EPDM and 25 % PP) material, has the greatest wear resistance in comparison with other samples, which makes it optimal for making a hose.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.