| Issue |
EPJ Web Conf.
Volume 321, 2025
VII International Conference on Applied Physics, Information Technologies and Engineering (APITECH-VII-2025)
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 7 | |
| Section | Quantum Physics, Optics, and Electromagnetic Phenomena | |
| DOI | https://doi.org/10.1051/epjconf/202532103008 | |
| Published online | 10 March 2025 | |
https://doi.org/10.1051/epjconf/202532103008
Calculation of the surface shape of an ultrasonic atomizer to form a spray torch of the required shape
1 Department of Measuring and Automation Methods and Tools, Biysk Technological Institute (Branch) Altai State Technical University, Biysk, Russia
2 Institute for Problems of Chemical and Energetic Technologies of the Siberian Branch of the RAS, Biysk, Russia
* Corresponding author: sergey@bti.secna.ru
Published online: 10 March 2025
The article presents a calculation method for the shape of the ultrasonic atomizer surface. The parameters influencing the shape of the spray torch and its performance are considered. Ultrasonic emitters are manufactured according to the obtained calculation formulas and their main technical characteristics are obtained. The developed calculation method allows creating multifunctional ultrasonic atomizers capable of solving various technological problems.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.