| Issue |
EPJ Web Conf.
Volume 376, 2026
6th International Conference on Recent Advances in Mechanical Engineering and Nanomaterials (ICRAMEN 2026)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 9 | |
| Section | Material Science and Nanomaterials | |
| DOI | https://doi.org/10.1051/epjconf/202637601001 | |
| Published online | 01 July 2026 | |
https://doi.org/10.1051/epjconf/202637601001
Influence Of Plasticizing Additives on The Physical and Mechanical Properties of Gypsum Materials
1 Fergana State Technical University, Fergana, Uzbekistan
2 Andijan State Technical Institute, Andijan, Uzbekistan
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
Published online: 1 July 2026
Abstract
The article presents the results of studies conducted to study the effect of superplasticizers of the FREM S3 brand based on naphthalene-formaldehyde resin and the SZhZ-3 brand based on polycarboxylate ether on water demand, setting kinetics and strength of gypsum materials used in ceramic industry enterprises producing porcelain and earthenware and sanitary ware. It is noted that the positive effect of the SDZ-3 additive on the formation of the optimal structure and strength of the gypsum material is significantly higher than that of the FREM S3 additive.
Key words: gypsum material / water demand / setting kinetics / strength / naphthalene-formaldehyde resin / superplasticizer / polycarboxylate
© The Authors, published by EDP Sciences, 2026
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.