Open Access
Issue
EPJ Web of Conferences
Volume 104, 2015
JDN 21 - Neutrons and Materials for Energy
Article Number 01008
Number of page(s) 31
Section Application of Neutrons Scattering Techniques to Materials for Energy
DOI https://doi.org/10.1051/epjconf/201510401008
Published online 16 October 2015
  1. A. Lodini, M. Perrin Analyse des contraintes résiduelles par diffraction des rayons X et des neutrons, Ed. CEA, ISBN 2-7272-0182-6, 1996
  2. IAEA TECDOC 1457, Measurement of residual stress in materials using neutrons, June 2005
  3. A. Lodini, T. Baudin, Rayonnement synchrotron, rayons X et neutrons au service des matériaux, Analyse des contraintes et textures, EDP Sciences 2012
  4. M. Ceretti, Strain and stress analysis by neutron diffraction, ECNS03 Neutrons Stress Analysis Course, September 1-2, 2003
  5. M E Fitzpatrick and A Lodini, Analysis of Residual Stress by Diffraction Using Neutron and Synchrotron Radiation, Meas. Sci. Technol. 14, 1739, 2003 [CrossRef]
  6. I. C. Noyan and J. B. Cohen, Residual Stress, Measurement by Diffraction and Interpretation, Springer-Verlag, New York, 1987: A, pp. 101–102; B, pp. 125–6; C, pp. 157–159 and D, pp. 126–130
  7. G. Kostorz, “Neutron Scattering”, Academic Press New York (1979) 227 [CrossRef]
  8. M.H. Mathon and C.H. de Novion, J. Phys. IV France 9 (1999) 127–149 [CrossRef] [EDP Sciences]
  9. M.H. Mathon et al., Journal of Nuclear Materials 312 (2003) 236–248 [CrossRef]
  10. M-H. Mathon, Y. de Carlan, X. Averty, A. Alamo, C.H. de Novion, Journal of ASTM International, October 2005, Vol. 2 N 9, Paper ID JAI12381
  11. Castelnau O, Béchade J-L, Brenner R, Chauveau T, Bacroix B, et al. In: Miannay D, Costa P, Francxxxois D, Pineau A, editors. Advances in mechanical behaviour, plasticity and damage Proc EUROMAT 2000. France: Tours; 2000. p. 911–6
  12. Crépin J, Bretheau T, Caldemaison D. Acta Metall Materé 1995; 43(10):3709–19 [CrossRef]
  13. N. Letouze, R. Brenner, O. Castelnau, J.-L. Béchade, and M. Mathon, “Residual strain distribution in Zircaloy-4 measured by neutron diffraction and estimated by homogenization techniques,” Scripta Materialia, vol. 47, pp. 595–599, Nov. 1 2002 [CrossRef]
  14. Brachet J.-C, Vandenberghe-Maillot V, Portier L, Gilbon D, Lesbros A, Waeckel N, Mardon J.-P. Hydrogen Content, Preoxidation, and Cooling Scenario Effects on Post-Quench Microstructure and Mechanical Properties of Zircaloy-4 and M5xxx Alloys in LOCA Conditions. Journal of ASTM International, May 2008, Vol 5, N5
  15. A Cabrera Salcedo PhD, Modélisation de la tenue à la trempe et du comportement mécanique post trempe des gaines de combustible de réacteurs à eau pressurisée, Ecole Nationale Supérieure des Mines de Paris, 2012
  16. Mardon, J. P., Garner, G., Beslu, P., and Charquet, D., “Update on the Development of Advanced Zirconium Alloys for PWR Fuel Rod Claddings,” ANS Portland, 2–6 March 1997, pp. 405–412
  17. Gilbon, D., Soniak, A., Doriot, S., and Mardon, J. P., “Irradiation Creep and Growth Behaviour, and Microstructural Evolution of Advanced Zr-Base Alloys,” Zirconium in the Nuclear Industry: Twelfth International Symposium, ASTM STP 1354, G. P. Sabol and G. D. Moan, Eds., ASTM International, West Conshohocken, PA, 2000, pp. 51–73 [CrossRef]
  18. S. Doriot, D. Gilbon, J.-L. Béchade, M.-H. Mathon, L. Legras, and J.-P. Mardon, “Microstructural stability of M5 (TM) alloy irradiated up to high neutron fluences,” in ZIRCONIUM IN THE NUCLEAR INDUSTRY: 14TH INTERNATIONAL SYMPOSIUM (Rudling, P and Kammenzind, B, ed.), vol. 1467 of American Society for Testing and Materials Special Technical Publications, pp. 175–201, ASTM Int Comm B10, 2005. 14th International Symposium on Zirconium in the Nuclear Industry, Stockholm, Sweden, Jun. 13–17, 2004
  19. Simonot, C., “Microstructural Evolution of Zirconium Alloys under Irradiation. Link with the Irradiation Growth Phenomenon,” thesis of Paris XI University, Orsay, France, 1995, réf. CEA-R –5718
  20. I.C. Elliot, G.A.J. Hack, Proceedings of the ASM International Conference on Structural Applications of Mechanical Alloying, Myrtle Beach, South Carolina, 27–29 March 1990, p. 15
  21. A. Alamo, H. Réglé, G. Pons, J.L. Béchade, Proceedings on the International Symposium on Mechanical Alloying, Kyoto, Japan, May 1991, Materials Science Forum 88–90 (1992), p. 183
  22. J.J. Fischer, J.J. de Barbadillo, M.J. Shaw, Proceedings of the ASM International Conference on Structural Applications of Mechanical Alloying, Myrtle Beach, South Carolina, 27–29 march 1990, p.79
  23. H. Réglé, PhD Université de Paris-Sud Orsay, 1994
  24. J.-L. Béchade, M. Mathon, V. Branger, H. Regle, and A. Alamo, “Texture analysis of oxide dispersion strengthened (ODS) Fe alloys by X-ray and neutron diffraction,” Journal de Physique IV, vol. 12, pp. 155–163, Jul 2002. X-Ray and Matter Conference (RX 2001), Strasbourg, France, Dec. 04–07, 2001 [CrossRef] [EDP Sciences]
  25. S.Y. Zhong et al., J. Nucl. Mat., 428 (2012) 154 [CrossRef]
  26. J. Ribis, M.-L. Lescoat, S.Y. Zhong, M.-H. Mathon, Y. de Carlan, Journal of nuclear material Vol. 442, Issues 1–3, Supplement 1 (2013) pp. 101–105 [CrossRef]
  27. S.Y. Zhong, J. Ribis, N. Lochet, Y. de Carlan, V. Klosek, M.H. Mathon, Journal of nuclear materials Volume 455 (2014) pp. 618–623 [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.