Timing and tracking for the Crystal Barrel detector

Open Access

Issue		EPJ Web Conf. Volume 134, 2017 Subnuclear Structure of Matter: Achievements and Challenges


Article Number		05003
Number of page(s)		14
Section		Instrumentation
DOI		https://doi.org/10.1051/epjconf/201713405003
Published online		26 January 2017

I. Jaegle et al. [CBELSA/TAPS Collaboration], “Quasi-free photoproduction of eta-mesons off the deuteron“, Eur. Phys. J. A 47 (2011) 89 [CrossRef] [EDP Sciences] [Google Scholar]
M. Ball et al. [GEM-TPC collaboration], “GEMTPC Technical design Report“, arXiv:1207.0013v1 [physics.ins-det] (2012). [Google Scholar]
A. Winnebeck, “Design studies for a tracking upgrade of the Crystal Barrel experiment and installation of a tracking testbench“, PhD. Thesis HISKP University Bonn (2009). [Google Scholar]
R. Schmitz [GEM-TPC Collaboration], “Energy calibration of a GEM-TPC Prototype with Kr-83m“, EXA 2011 Conference Record, DOI: 10.1007/s10751-011-0555-6 (2012). [Google Scholar]
R. Schmitz, “Auflösungsstudien und Energiekalibrierung für eine GEM-TPC im Crystal-Barrel-Experiment“, PhD. Thesis HISKP University Bonn (2017). [Google Scholar]
A. R. Gabler et al., “Response of TAPS to monochromatic photons with energies between 45 and 790 MeV“, Nucl. Instr. and Meth. in Phys. Res. A 346 (1994) 168. [Google Scholar]
S. Diehl, “New Readout Concepts for Electromagnetic Calorimeters“, Bachelor Thesis University Gießen (2010). [Google Scholar]
F.N. Afzal, “Measurement of the double polarization observable E in π⁰-, η- and η′ photoproduction“, PhD. Thesis HISKP University Bonn (2017). [Google Scholar]
H.v. Pee, private communication (2009). [Google Scholar]
S. Undorf, “Untersuchungen zur Lichtsammlung von Caesiumiodid-Kristallen“, Bachelor Thesis HISKP University Bonn (2010). [Google Scholar]
E. Aker et al., Nucl. Instr. and Meth. in Phys. Res., A 321, 69–109 (1992). [Google Scholar]
Saint-Gobain Crystals, CsI(Tl), CsI(Na) Cesium Iodide Scintillation Material, Datenblatt, 2007. [Google Scholar]
D. Kaiser, “Steuerung und Überwachung einer Zeitprojektionskammer mit GEM-Auslese“, PhD. Thesis HISKP University Bonn (2014). [Google Scholar]
M. Urban, “Aufbau eines Lichtpulsersystems zur Messung des Verstärkungsfaktors der APDs in der neuen CB-Ausleseelektronik“, PhD. Thesis HISKP University Bonn (2017). [Google Scholar]
J. Müllers, “Design and Test of a Slowcontrol for the APD Upgrade of the Crystal Barrel Calorimeter“, Master Thesis HISKP University Bonn (2013). [Google Scholar]
P. Klassen, “Design and Test of a new Cluster Finder for the Crystal Barrel Calorimeter“, PhD. Thesis HISKP University Bonn (2017). [Google Scholar]
J. Bieling, github.com/jobisoft/jTDC. [Google Scholar]
G. Grutzeck, “Implementierung eines Carry-Chain TDCs auf dem neuen CBDiskriminator Modul“, Bachelor Thesis HISKP University Bonn (2016). [Google Scholar]
P. Pauli, “Studies on an Automatic Gain Stabilisation for the new APD Readout of the Crystal Barrel Calorimeter“, Bachelor Thesis HISKP University Bonn (2015). [Google Scholar]
C. Honisch “Design, Aufbau und Test einer neuen Ausleseelektronik für das Crystal-Barrel-Kalorimeter“, PhD Thesis, HISKP University Bonn (2014). [Google Scholar]
J. Müllers “An FPGA-based Sampling-ADC Readout for the Crystal Barrel Calorimeter“, PhD. Thesis HISKP University Bonn (2017). [Google Scholar]
T. Poller, “Simulation, Aufbau und Test einer Schaltung zur Baseline-Verschiebung der Crystal Barrel Kalorimetersignale für den Sampling-ADC“, Bachelor Thesis HISKP University Bonn (2016). [Google Scholar]
P. Marciniewski, Angströmlaboratoriet, Uppsala, private communication (2014). [Google Scholar]
J. Schultes, “Test and Improvement of Feature-Extraction Methods for the new SADC-Readout of the Crystal Barrel Calorimeter“, Master Thesis HISKP University Bonn (2016). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.