Open Access
| Issue |
EPJ Web Conf.
Volume 140, 2017
Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media
|
|
|---|---|---|
| Article Number | 03012 | |
| Number of page(s) | 4 | |
| Section | Granular flow | |
| DOI | https://doi.org/10.1051/epjconf/201714003012 | |
| Published online | 30 June 2017 | |
- A. Watkinson and J. Brimacombe, Metallurgical Transactions B 13, 369 (1982) [CrossRef] [Google Scholar]
- G. Wes, A. Drinkenburg, and S. Stemerding, Powder Technology 13, 177 (1976) [Google Scholar]
- C. Argento and D. Bouvard, International Journal of Heat and Mass Transfer 39, 1343 (1996) [Google Scholar]
- J. Lehmberg, M. Hehl, and K. Schügerl, Powder Technology textbf 18, 149 (1977) [CrossRef] [Google Scholar]
- S. H. Tscheng and A. P. Watkinson, The Canadian Journal of Chemical Engineering 57, 57 (1979) [Google Scholar]
- A. Boateng and P. Barr, International Journal of Heat and Mass Transfer 39, 2131 (1996) [Google Scholar]
- Yohannes B., Emady H., Anderson K., Paredes I., Javed M., Borghard W., Muzzio F. J., Glasser B. J., and Cuitiño A. M., Phys. Rev. E 94, 042902 (2016) [CrossRef] [PubMed] [Google Scholar]
- H. N. Emady, K. V. Anderson, W. G. Borghard, F. J. Muzzio, B. J. Glasser, and A. M. Cuitino, Chemical Engineering Science 152, 45 (2016). [Google Scholar]
- I. J. Paredes, B. Yohannes, H. Emady, B. J. Glasser, W. G. Borghard, F. Muzzio, A. M. Cuitiño, J. Beeckman, S. Ilias, P. Podsiadlo, E. Jezek, J. Baumgartner, Chemical Engineering Science 158, 50 (2017) [Google Scholar]
- P. Thammavong, M. Debacq, S. Vitu, and M. Dupoizat, Chemical Engineering and Technology 34, 707 (2011) [CrossRef] [Google Scholar]
- A. I. Nafsun, F. Herz, E. Specht, V. Scherer, and S. Wirtz, Experimental Heat Transfer 29, 520 (2016). [CrossRef] [Google Scholar]
- W. L. Vargas and J. J. McCarthy, AIChE Journal 47, 1052 (2001) [CrossRef] [Google Scholar]
- I. Figueroa, W. L. Vargas, and J. J. McCarthy, Chemical Engineering Science 65, 1045 (2010) [Google Scholar]
- S.-Q. Li, L.-B. Ma, W. Wan, and Q. Yao, Chemical Engineering and Technology 28, 1480 (2005) [CrossRef] [Google Scholar]
- A. Morris, S. Pannala, Z. Ma, and C. Hrenya, International Journal of Heat and Mass Transfer 89, 1277 (2015). [Google Scholar]
- H. Hertz, J. Reine Angew. Math. 92, 156 (1882) [Google Scholar]
- R. D. Mindlin and H. Deresiewicz, J. Applied Mech. 20, 327 (1953) [Google Scholar]
- K. L. Johnson, Contact mechanics (Cambridge University Press, Cambridge, 1985), page number [Google Scholar]
- Y. Tsuji, T. Tanaka, and T. Ishida, Powder Tech. 71, 239 (1992) [Google Scholar]
- G. K. Batchelor and R. W. O’Brien, Proc. R. Soc. London A 355, 313 (1977). [CrossRef] [Google Scholar]
- P. Rognon and I. Einav, Phys. Rev. Lett. 105, 218301 (2010). [Google Scholar]
- B. Chaudhuri, F. J. Muzzio, and M. S. Tomassone, ibid. 198, 6 (2010). [Google Scholar]
- M. Li, X. Ling, H. Peng, Z. Cao, and Y. Wang, Can. J. Chem. Eng. doi:10.1002/cjce.22681 (2016) [PubMed] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.