Open Access
| Issue |
EPJ Web Conf.
Volume 143, 2017
EFM16 – Experimental Fluid Mechanics 2016
|
|
|---|---|---|
| Article Number | 02010 | |
| Number of page(s) | 4 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201714302010 | |
| Published online | 12 May 2017 | |
- P. A. Laski, J. E. Takosoglu, S. Blasiak. Design of a 3-DOF tripod electro-pneumatic parallel manipulator. Robotics and Autonomous Systems Vol. 72, pp. 59–70, (2015) [Google Scholar]
- P. A. Laski, J. E. Takosoglu, S. Blasiak. Delta type closed kinematics chain with pneumatic muscle actuator manipulator. In V Fuis (Ed.), ENGINEERING MECHANICS 2014 (pp. 360–363). (2014). [Google Scholar]
- J. E. Takosoglu, P. A. Laski, S. Blasiak. A fuzzy logic controller for the positioning control of an electropneumatic servo-drive. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering Vol. 226, no. 10: pp. 1335–1343, (2012) [Google Scholar]
- Olsson, H. Control Systems with Friction. Department of Automatic Control, Lund Institute of Technology, (1996). [Google Scholar]
- L. Nowakowski, E. Miko, M. Skrzyniarz, The analysis of the zone for initiating the cutting process of x37crmov51 steel, Engineering Mechanics (2016). [Google Scholar]
- L. Nowakowski, M. Wijas, The Evaluation of the process of surface regeneration after laser cladding and face milling, Engineering Mechanics (2016). [Google Scholar]
- S. Blasiak, J. E. Takosoglu, P. A. Laski. Heat transfer and thermal deformations in non-contacting face seals. Journal of Thermal Science and Technology Vol. 9, no. 2, (2014) [Google Scholar]
- S. Blasiak, P. A. Laski, J. E. Takosoglu. Parametric analysis of heat transfer in non-contacting face seals. International Journal Of Heat And Mass Transfer, Vol.57, Issue 1, pp. 22–31, (2013) [Google Scholar]
- S. Blasiak. The two dimensional thermohydrodynamic analysis of a lubrication in non-contacting face seals. Journal of Thermal Science and Technology, 10(1), JTST0016 (2015). [CrossRef] [Google Scholar]
- S. Blasiak. An analytical approach to heat transfer and thermal distortions in non-contacting face seals. International Journal of Heat and Mass Transfer, 81, 90–102. (2015). [Google Scholar]
- S. Blasiak., A. Pawinska, Direct and inverse heat transfer in non-contacting face seals. International Journal of Heat and Mass Transfer, 90, 710–718. (2015). [Google Scholar]
- S. Blasiak., A. V. Zahorulko, A parametric and dynamic analysis of non-contacting gas face seals with modified surfaces. Tribology International, 94, 126–137. (2016). [Google Scholar]
- D. Janecki, J. Zwierzchowski, L. Cedro, A problem of optimal cylindricity profile matching, Bulletin Of The Polish Academy Of Sciences-Technical Sciences Vol: 63, Pages: 771–779 (2015) [CrossRef] [Google Scholar]
- D. Janecki, J. Zwierzchowski, The bird-cage method used for measuring cylindricity. A problem of optimal profile matching, XIX IMEKO World Congress: Fundamental And Applied Metrology, Proceedings Pages: 1784–1789 (2009). [Google Scholar]
- S. Blasiak, J. E. Takosoglu, P. A. Laski. Optimizing the flow rate in a pneumatic directional control valve. Proceedings of 20th International Conference on Engineering Mechanics 2014, Brno University of Technology, Czech Republic, pp. 96–99, (2014) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.