EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 143 (2017) EPJ Web Conf., 143 (2017) 02065 References
Open Access
Issue
EPJ Web Conf.
Volume 143, 2017
EFM16 – Experimental Fluid Mechanics 2016
Article Number 02065
Number of page(s) 5
Section Contributions
DOI https://doi.org/10.1051/epjconf/201714302065
Published online 12 May 2017
  1. J.E. Takosoglu, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  2. J.E. Takosoglu, P.A. Laski, S. Blasiak, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2014). [Google Scholar]
  3. J.E. Takosoglu, R.F. Dindorf, P.A. Laski, International Journal of Advanced Manufacturing Technology. 40 (3–4) (2009), 349–361. [Google Scholar]
  4. J.E. Takosoglu, P.A. Laski, S. Blasiak, Proceedings of The Institution of Mechanical Engineers Part I-Journal of Systems And Control Engineering. 226 (I10) (2012), 1335–1343. [Google Scholar]
  5. J.E. Takosoglu, R.F. Dindorf, P.A. Laski, International Journal Of Advanced Manufacturing Technology. 40 (3–4) (2009), 349–361. [Google Scholar]
  6. J.E. Takosoglu, P.A. Laski, S. Blasiak, G. Bracha, D. Pietrala, Measurement & Control. 49 (2) (2016), 62–71. [Google Scholar]
  7. R. Trochimczuk, in: Z Gosiewski and Z Kulesza (Ed.), Mechatronic Systems And Materials Iv, Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland, 2013: pp. 3–8. [Google Scholar]
  8. R. Trochimczuk, M. Gawrysiak, in: Z Gosiewski and Z Kulesza (Ed.), Mechatronic Systems And Materials III, Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland, 2009: pp. 107–112. [Google Scholar]
  9. S. Wawrzyniak, K. Peszynski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2014). [Google Scholar]
  10. J. Zwierzchowski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  11. D.S. Pietrala, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  12. S. Blasiak, J.E. Takosoglu, P.A. Laski, Journal of Thermal Science and Technology. 9 (2) (2014), JTST0011--JTST0011. [Google Scholar]
  13. S. Blasiak, A. Pawinska, International Journal of Heat and Mass Transfer. 90 (2015), 710–718. [Google Scholar]
  14. S. Blasiak, P.A. Laski, J.E. Takosoglu, International Journal of Heat and Mass Transfer. 57 (1) (2013), 22–31. [CrossRef] [Google Scholar]
  15. S. Blasiak, C. Kundera, J. Bochnia, Procedia Engineering. 39 (2012), 366–378. [CrossRef] [Google Scholar]
  16. S. Blasiak, C. Kundera, Procedia Engineering. 39 (2012), 315–326. [CrossRef] [Google Scholar]
  17. S. Blasiak, Journal of Thermal Science and Technology. 10 (1) (2015), JTST0016--JTST0016. [CrossRef] [Google Scholar]
  18. S. Blasiak, International Journal of Heat and Mass Transfer. 81 (2015), 90–102. [Google Scholar]
  19. S. Blasiak, A. V Zahorulko, Tribology International. 94 (2016), 126–137. [Google Scholar]
  20. S. Blasiak, J.E. Takosoglu, P.A. Laski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, Svratka, Czech Republic, 2014). [Google Scholar]
  21. P. Suranek, M. Mahdal, J. Tuma, (IEEE, 345 E 47TH ST, New York, NY 10017 USA, 2013). [Google Scholar]
  22. L. Smutny, M. Mahdal, J. Skuta, (World Scientific And Engineering Acad And Soc, Ag Loannou Theologou 17-23, 15773 Zographou, Athens, Greece, 2009). [Google Scholar]
  23. L. Nowakowski, M. Wijas, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  24. L. Nowakowski, E. Miko, M. Skrzyniarz, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  25. I. Krzysztofik, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  26. D. Janecki, J. Zwierzchowski, (Imeko, Po Box 457, H-1371 5 Budapest, Hungary, 2009). [Google Scholar]
  27. D. Janecki, J. Zwierzchowski, Measurement Science & Technology. 26 (8) (2015),. [Google Scholar]
  28. D. Janecki, L. Cedro, J. Zwierzchowski, Metrology And Measurement Systems. 22 (2) (2015), 289–302. [Google Scholar]
  29. D. Janecki, J. Zwierzchowski, L. Cedro, Bulletin of The Polish Academy of Sciences-Technical Sciences. 63 (3) (2015), 771–779. [Google Scholar]
  30. T. Huscio, W. Kolodziejczyk, in: Z Gosiewski and Z Kulesza (Ed.), Mechatronic Systems And Materials IV, Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland, 2013: pp. 313–317. [Google Scholar]
  31. G.F. Bracha, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  32. Terelak Łukasz, Badanie wpływu temperatury na dokładność pozycjonowania napędów mięśniowych z użyciem kamery termograficznej VIGO, Politechnika Świętokrzyska, 2011. [Google Scholar]
  33. T. Huscio, F. Siemieniako, in: Z Gosiewski and Z Kulesza (Ed.), Mechatronic Systems And Materials IV, Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland, 2013: pp. 372–377. [Google Scholar]
  34. J. Zavadil, J. Tuma, J. Valicek, M. Mahdal, J. Los, (IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA, 2013). [Google Scholar]
  35. P. Suranek, M. Mahdal, J. Tuma, (IEEE, 345 E 47TH ST, New York, NY 10017 USA, 2014). [Google Scholar]
  36. P. Suranek, M. Mahdal, J. Tuma, (IEEE, 345 E 47TH ST, New York, NY 10017 USA, 2015). [Google Scholar]
  37. A. Laski Pawel, E. Takosoglu Jakub, S. Blasiak, Robotics And Autonomous Systems. 72 (2015), 59–70. [Google Scholar]
  38. P.A. Laski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  39. P.A. Laski, J.E. Takosoglu, S. Blasiak, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2014). [Google Scholar]
  40. P.A. Laski, J.E. Takosoglu, S. Blasiak, Robotics and Autonomous Systems. (2014),. [Google Scholar]
  41. P.A. Laski, J.E. Takosoglu, S. Blasiak, Robotics and Autonomous Systems. 72 (2015), 59–70. [Google Scholar]
  42. I. Krzysztofik, Z. Koruba, Journal of Automation and Information Sciences. 44 (5) (2012), 38–47. [Google Scholar]
  43. P. Kolber, D. Perczynski, B. Landowski, S. Wawrzyniak, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  44. K. Migawa, L. Knopik, S. Wawrzyniak, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  45. K. Peszynski, W. Szmyt, S. Wawrzyniak, D. Perczynski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016). [Google Scholar]
  46. Z. Travnicek, K. Peszynski, J. Hosek, S. Wawrzyniak, International Journal Of Heat And Mass Transfer. 46 (7) (2003), 1265–1278. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.