Open Access
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 02024
Number of page(s) 6
Section Experimental Techniques
Published online 07 September 2018
  1. Besnard G., Hild F., Lagrange J. M., Martinuzzi P., Roux S., Analysis of necking in high speed experiments by stereocorrelation, International Journal of Impact Engineering. 49: 1353–1367 (2012) [CrossRef] [Google Scholar]
  2. Bridgman, P. W., Studies in large plastic flow and fracture (Vol. 177). New York: McGraw-Hill, (1952) [Google Scholar]
  3. Lin, E.I.H., Plastic instability criteria for necking of bars and ballooning of tubes, Int. conf. on structural mechanics in reactor technology, San Francisco, (1977) [Google Scholar]
  4. Hart EW., Theory of the tensile test, Acta Metall; 15: 351–5. (1967) [Google Scholar]
  5. Guan Z., Quantitative analysis on the onset of necking in rate-dependent tension, Materials and Design 56 209–218 (2014) [CrossRef] [Google Scholar]
  6. Ghosh, A. K. Tensile instability and necking in materials with strain hardening and strain-rate hardening. Acta Metallurgica, 25 (12), 1413-1424 (1977) [CrossRef] [Google Scholar]
  7. Mirone, G., & Barbagallo, R. Congelamento dello Strain Rate Effect In Prove Dinamiche su Hopkinson Bar. Proceedinigs of the 46th AIAS National Conference, Pisa (2017) [Google Scholar]
  8. Mirone G., Corallo D., Barbagallo R., Experimental issues in tensile Hopkinson bar testing and a model of dynamic hardening. Int. J. of Impact Engineering, 103, 180-194 (2017) [CrossRef] [Google Scholar]
  9. Mirone, G. A new model for the elastoplastic characterization and the stress–strain determination on the necking section of a tensile specimen. International Journal of Solids and Structures, 41 (13), 3545-3564 (2004) [CrossRef] [Google Scholar]
  10. Mirone G., The dynamic effect of necking in Hopkinson bar tension tests, Mech. Mater. 58 84- 96 (2013) [CrossRef] [Google Scholar]
  11. Osovski, S., Rittel, D., Rodríguez-Martínez, J. A., & Zaera, R., Dynamic tensile necking: influence of specimen geometry and boundary conditions. Mechanics of materials, 62, 1-13 (2013) [CrossRef] [Google Scholar]
  12. Rusinek A.,Zaera R., Klepaczko J. R., Cheriguene R., Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel, Acta Mater.; 53: 5387–400 (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.