Open Access
| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 6 | |
| Section | Microstructural Effects | |
| DOI | https://doi.org/10.1051/epjconf/201818303005 | |
| Published online | 07 September 2018 | |
- G. I. Kanel, Spall Fracture: Methodological aspects, mechanisms and governing factors, Int. J. Frac. 163, 173-191 (2010) [CrossRef] [Google Scholar]
- D. Curran, L. Seaman, D. Shockley, Dynamic failure of solids, Phys. Reports, 147, 253-388 (1987) [Google Scholar]
- L. Seaman, D. R. Curran, D. A. Shockley, Computational models for ductile and brittle fracture, J. Appl. Phys. 47, 4814-26 (1976) [CrossRef] [Google Scholar]
- G. T. (Rusty) Gray III, High-strain-rate deformation: Mechanical behavior and deformation substructures induced, Ann. Rev. Mater. Res. 42, 285-303 (2012) [Google Scholar]
- S. J. Fensin, E. K. walker, E. K. Cerreta, C. P. Trujillo, D. T. Martinez, and G. T. Gray III, Dynamic failure in two-phase materials, J. App. Phys. 18, 235305 (2015) [CrossRef] [Google Scholar]
- S. J. Fensin, E. K. Cerreta, G. T. Gray III and S. M. Valone, Why are some Interfaces in Materials Stronger than others, Sci. Rep. 4, 5641 (2014) [PubMed] [Google Scholar]
- S. A. Novikov, I. I. Divnov. and A. G. Ivanov, The study of fracture of steel, aluminum, and copper under explosive loading, Phys. Met. Metallogr. 21, 122 (1966) [Google Scholar]
- G.V. Stepanov, Spall fracture of metals by elasticplastic loading waves, Problemy Prochnosti 8, 66-70 (1976) (in Russian) [Google Scholar]
- G. I. Kanel, S. V. Razorenov, K. Baumung, J. Singer, Dynamic yield and tensile strength of aluminum single crystals at temperatures up to the melting point, J Appl Phy 90, 136-143 (2001) [CrossRef] [Google Scholar]
- T. Antoun, L. Seaman, D. R. Curran,G. I. Kanel,S. V. Razorenov, A. V. Utkin, Spall fracture, Springer, New York (2003) [Google Scholar]
- M. A. Meyers, C. T. Aimone, Dynamic fracture (spalling) of metals, Prog. Mater. Sci 28, 1-96 (1983) [CrossRef] [Google Scholar]
- L. Seaman, D. Curran, D. Shockley, Dynamic failure in solids, Phys. Today 30, 46-55 (1977) [NASA ADS] [CrossRef] [Google Scholar]
- R. W. Minich, J. Cazamias, M. Kumar, A. Schwartz, Effect of microstructural length scales on spall behavior of copper, Metall. Mater. Trans. A 35, 2663-73 (2004) [Google Scholar]
- R. W. Minich, M. Kumar, A. Schwatz, J. Cazamias, Scaling, microstructure and dynamic fracture, AIP Conf. Proc. 845, 642-45 (2006) [Google Scholar]
- G. I. Kanel, S. V. Rasorenov, V. E. Fortov, Shock Wave and High-Strain-Rate Phenomena in Materials (Marcel Dekker, Cambridge, 1992) [Google Scholar]
- G. T. Gray III, V. Livescu, P. A. Rigg, C. P. Trujillo, C. M. Cady, S. R. Chen, J. S. Carpenter, T. J. Lienert, S. J. Fensin, Structure/Property (constitutive and spallation response) of additively manufactured 316L steel, Acta Mat. 138,140-149 (2017) [Google Scholar]
- J. P. Escobedo-Diaz, D. Dennis-Koller, E. K. Cerreta, B. M. Patterson, C. A. Bronkhorst, B. L. Hansen, D. Tonks, R. A. Lebensohn, Effects of grain size and boundary structure on the dynamic tensile response of copper, J. Appl. Phys. 110, 033513 (2011) [CrossRef] [Google Scholar]
- W. D. Callister Jr, D. G. Rethwisch, Materials Science and Engineering, John Wiley and Sons, Hoboken, NJ (2008) [Google Scholar]
- B. J. Jensen, D. B. Holtkamp, P. A. Rigg, and D. H. Dolan, J. Appl. Phys. 101, 013523 (2007) [CrossRef] [Google Scholar]
- G. T. Gray III, N. K. Bourne, K. S. Vecchio, J. C. F. Millett, Int J Frac 163, 243-258 (2010) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.