Open Access
Issue
EPJ Web Conf.
Volume 213, 2019
EFM18 – Experimental Fluid Mechanics 2018
Article Number 02046
Number of page(s) 7
Section Contributions
DOI https://doi.org/10.1051/epjconf/201921302046
Published online 28 June 2019
  1. D. Wu, Y. Wang, Y. Wang., S. Li, X. Wei: Release of alkali metals during co-firing biomass and coal, RENEW ENERG, 96, 91-97 (2016) [CrossRef] [Google Scholar]
  2. X. Wei, U. Schnell, K.R.G. Hein K.R.G: Behaviour of gaseous chlorine and alkali metals during biomass thermal utilisation, FUEL, 84, 841–848 (2005) [Google Scholar]
  3. M. Nasrullah, P. Vainikka, J. Hannula, M. Hurme: Elemental balance o SRF production process: Solid recovered fuel produced from commercial and industrial waste, FUEL, 145, 1-11 (2015) [CrossRef] [Google Scholar]
  4. W. Ma, G. Hoffmann, M. Schirmer, G. Chen, V. S. Rotter.: Chlorine characterization and thermal behavior in MSW and RDF, J HAZARD MATE. 178, 489–498 (2010) [CrossRef] [Google Scholar]
  5. T. Gruber, K. Schulz, R. Scharler, I. Obernberger: Investigation of the corrosion behaviour of 13CrMo4–5 for biomass fired boilers with coupled online corrosion and deposit probe measurements, FUEL, 144, 15–24 (2015) [CrossRef] [Google Scholar]
  6. Y. Shao, Ch. Xu, J. Zhu, F. Preto, J. Wa, G. Tourigny, Ch. Badour, H. Li: Ash and chlorine deposition during co-combustion of lignite and a chlorine-rich Canadian peat in a fluidized bed – Effects of blending ratio, moisture content and sulfur addition, FUEL, 95, 25-34 (2012) [CrossRef] [Google Scholar]
  7. P. Ruokojarvi, K. Tuppurainen, Ch. Mueller, P. Kilpinen, J. Ruuskanen: PCDD/F reduction in incinerator ue gas by adding urea to RDF feedstock, CHEMOSPHERE, 43, 199–205 (2001) [CrossRef] [PubMed] [Google Scholar]
  8. E. Abad, M. A. Adrados, A. J. Caixach, J. Rivera: Dioxin Abatement Strategies and mass balance at a Municipal Waste Management Plant, ENVIRON. SCI T., 36, 92-99 (2002) [CrossRef] [Google Scholar]
  9. M. Altarawneh, B. Z. Długogorski, E. M. Kennedy, J. C. Mackie: Mechanisms for formation, chlorination, dechlorination and destruction of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), PROG ENERG COMBUST 35, 245-274 (2009) [CrossRef] [Google Scholar]
  10. F. Preto, R. McCleave, D. McLaughlin, J. Wang: Dioxins/furans emissions from fluidized bed combustion of salt-laden hog fuel, CHEMOSPHERE 58, 935-941 (2005) [CrossRef] [PubMed] [Google Scholar]
  11. J. Liao, A. Buekens, K. Olie, J. Yang, t. Chen, X. Li: Iron and copper catalysis of PCDD/F formation, 23, 3, 2415-2425 (2016) [Google Scholar]
  12. S. Poskrobko, D. Król, J. Łach: Hydrogen Chloride Bonding with Calcium Hydroxide in Combustion and Two-Stage Combustion of Fuels from Waste, ENERG. FUEL, 26, 842−853 (2012) [CrossRef] [Google Scholar]
  13. S. Poskrobko: Identification and stabilization of combusting animal waste with active participation of bone material — Emission of SO2 and HCl, FUEL PROCESS TECHNOL 113, 20–27 (2013) [Google Scholar]
  14. D. Król, A. Borsukiewicz Gozdur, S. Poskrobko: The study of residual forest biomass as a biofuel in context of the boiler operational problems slagging and high-temperature corrosion, DREWNO 59, 1-8 (2016) [Google Scholar]
  15. Y. Xie, w. Xie, K. Liu, L. Dicken, W. P. Pan, J. T. Riley: The effect of sulfur dioxide on the formation of molecular chlorine during co-combustion of fuels, ENERG. FUEL 14, 597-602 (2000) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.