Open Access
| Issue |
EPJ Web Conf.
Volume 249, 2021
Powders & Grains 2021 – 9th International Conference on Micromechanics on Granular Media
|
|
|---|---|---|
| Article Number | 12004 | |
| Number of page(s) | 4 | |
| Section | Powder Processing | |
| DOI | https://doi.org/10.1051/epjconf/202124912004 | |
| Published online | 07 June 2021 | |
- R. Tuunila, L. Nyström, Miner. Eng. 11, 1089–1094 (1998) [Google Scholar]
- B. Luczak, R. Müller, C. Kessel, M. Ulbricht, H.J. Schultz, Powder Technol. 342, 108–117 (2019) [Google Scholar]
- L. Scott, A. Borissova, A. Burns, M. Ghadiri, Powder Technol. 377, 233–243 (2021) [Google Scholar]
- S. Dogbe, M. Ghadiri, A. Hassanpour, C. Hare, D. Wilson, R. Storey, I. Crosley, EPJ Web Conf. 140, 7–10 (2017) [Google Scholar]
- M. Ramanujam, D. Venkateswarlu, Powder Technol. 3, 92–101 (1969) [Google Scholar]
- F. Müller, R. Polke, G. Schädel, Int. J. Miner. Process. 44–45, 315–326 (1996) [Google Scholar]
- S. Palaniandy, K.A.M. Azizli, H. Hussin, S.F.S. Hashim, Miner. Eng. 21, 380–388 (2008) [Google Scholar]
- P. Nair, M. Ramanujam, Adv. Powder Technol. 3, 273–284 (1992) [Google Scholar]
- A. Katz, H. Kalman, Part. Part. Syst. Charact. 24, 332–338 (2007) [Google Scholar]
- H. Kürten, H. Rumpf, Chemie Ing. Tech. 38 331–342 (1966) [Google Scholar]
- T. Brosh, H. Kalman, A. Levy, I. Peyron, F. Ricard, Powder Technol. 257, 104–112 (2014) [Google Scholar]
- R. MacDonald, D. Rowe, E. Martin, L. Gorringe, Powder Technol. 299, 26–40 (2016) [Google Scholar]
- B. Luczak, Flow Conditions inside Spiral Jet Mills and Impact on Grinding Performance Dissertation Zur Erlangung Des Akademischen Grades Eines, Universitat Duisburg-Essen, (2018) [Google Scholar]
- H. Kürten, H. Rumpf, Chemie Ing. Tech. 38, 1187–1192 (1966) [Google Scholar]
- T. Han, H. Kalman, a. Levy, Part. Sci. Technol. 20, 325–340 (2002) [Google Scholar]
- S. Teng, P. Wang, Q. Zhang, C. Gogos, Powder Technol. 208, 684–693 (2011) [Google Scholar]
- S.C. Dogbe, Predictive Milling of Active Pharmaceutical Ingredients and Excipients, The University of Leeds, (2017) [Google Scholar]
- V. Rodnianski, N. Krakauer, K. Darwesh, A. Levy, H. Kalman, I. Peyron, F. Ricard, Powder Technol. 243, 110–119 (2013) [Google Scholar]
- S. Bnà, R. Ponzini, M. Cestari, C. Cavazzoni, C. Cottini, A. Benassi, Powder Technol. 364, 746–773 (2020) [Google Scholar]
- S. Elghobashi. Applied Scientific Research, 48, 301-314 (1991) [Google Scholar]
- Y. Tsuji, T. Kawaguchi, T. Tanaka, Powder Technol. 77, 79–87 (1993) [Google Scholar]
- B.H. Xu, a. B. Yu, Chem. Eng. Sci. 52, 2785–2809 (1997) [CrossRef] [Google Scholar]
- A. Di Renzo, F.P. Di Maio, R. Girimonte, B. Formisani, Powder Technol. 184, 214–223 (2008) [Google Scholar]
- S.A. Morsi, A.J. Alexander, J. Fluid Mech. 55, 193–208 (1972) [Google Scholar]
- H. Norouzi, R. Zarghami, R. Sotudeh-Gharebagh, N. Mostoufi, Coupled CFD-DEM Modeling, John Wiley & Sons, Chichester, (2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.