Open Access
| Issue |
EPJ Web Conf.
Volume 249, 2021
Powders & Grains 2021 – 9th International Conference on Micromechanics on Granular Media
|
|
|---|---|---|
| Article Number | 14010 | |
| Number of page(s) | 4 | |
| Section | Particle Simulations and Particle-Based Methods | |
| DOI | https://doi.org/10.1051/epjconf/202124914010 | |
| Published online | 07 June 2021 | |
- P.A. Cundall and O.D.L. Strack, Geotechnique 29, 47 (1979) [Google Scholar]
- A.B. Huang and M.Y. Ma, Can. Geotech. J. 31, 91 (1994) [CrossRef] [Google Scholar]
- M.J. Jiang, H.S. Yu, D. Harris, Int. J. Numer. Anal. Meth. Geomech. 30, 335 (2006) [CrossRef] [Google Scholar]
- M.J. Jiang, Y. Dai, L. Cui, Z. Shen, X. Wang, Granul. Matter 16, 785 (2014) [CrossRef] [Google Scholar]
- M.J. Jiang, F. Liu, H. Wang, X. Wang, Eng. Comput. 32, 2067 (2015) [CrossRef] [Google Scholar]
- M. Arroyo, J. Butlanska, A. Gens, F. Calvetti, M. Jamiolkowski, Géotechnique 61, 525 (2011) [CrossRef] [Google Scholar]
- J. Butlanska, M. Arroyo, A. Gens, Virtual calibration chamber CPT on Ticino sand, in 2nd Int. Symposium on Cone Penetration Testing, Huntington Beach, CA, USA (2010) [Google Scholar]
- J. Butlanska, M. Arroyo, A. Gens, C. O’Sullivan, Can. Geotech. J. 51, 51 (2014) [CrossRef] [Google Scholar]
- J. Butlanska, Cone penetration test in a virtual calibration chamber. Doctoral thesis, Universitat Politècnica de Catalunya, 2014. [Google Scholar]
- M.O. Ciantia, M. Arroyo, J. Butlanska, A. Gens, Comput. Geotech. 73, 109 (2016) [CrossRef] [Google Scholar]
- A. Khosravi, A. Martinez, J.T. DeJong, Can. Geotech. J. 57, 1369 (2019) [CrossRef] [Google Scholar]
- A.K. Rakhimzhanova, F.A. Khamitov, N.H. Minh, C. Thornton, 3D DEM simulations of triaxial compression tests of cemented sandstone, in Proceedings of IS Atlanta 2018 symposium on geomechanics from micro to macro in research and practice, Atlanta, USA (2018) (in press) [Google Scholar]
- A.K. Rakhimzhanova, C. Thornton, N.H. Minh, S.C. Fok, Y. Zhao, Comput. Geotech. 113, 103068 (2019) [CrossRef] [Google Scholar]
- P.K. Robertson, R.G. Campanella, D. Gillespie, J. Greig, Use of piezometer cone data, in Use of in situ tests in geotechnical engineering, June 23, ASCE (1986) [Google Scholar]
- H. Hertz, J. für die Reine und Angew. Math. 92, 156 (1881) [Google Scholar]
- R.D. Mindlin, Trans. ASME J. Appl. Mech. 16, 259 (1949) [Google Scholar]
- K.L. Johnson, K. Kendall, A.D. Roberts, Proc. R. Soc. Lond. A. 324, 301 (1971) [Google Scholar]
- K.L. Johnson, Adhesion at the contact of solids, in Proceedings of the 4th IUTAM Congress, 133 (1976) [Google Scholar]
- A.D. Shabdirova, Z. Bissekenova, N.H. Minh, J.R. Kim, Sample preparation method of clay-rich sandstone analogue of sandstone reservoirs in Kazakhstan, in 50th US Rock Mechanics / Geomechanics Symposium (2016) [Google Scholar]
- USGS Open-File Report 2006-1195. https://pubs.usgs.gov/of/2006/1195/htmldocs/images/chart.pdf [Google Scholar]
- P.K. Robertson, Can. Geotech. J. 27, 15 (1990) [Google Scholar]
- R. Campanella, P. Robertson, State-of-the-art in insitu testing of soils; developments since 1978, engineering, in Foundation Conference on Updating Subsurface Sampling of Soils and Rocks and Their In-Situ Testing (1982) [Google Scholar]
- M.E. Kabir, B. Song, B.E. Martin, W. Chen, Compressive behaviour of fine sand. Sandia National Laboratories (2010) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.