Open Access
| Issue |
EPJ Web Conf.
Volume 336, 2025
International Conference on Sustainable Development in Advanced Materials, Manufacturing, and Industry 4.0 (INSDAM’25)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 13 | |
| Section | Advanced Materials | |
| DOI | https://doi.org/10.1051/epjconf/202533601003 | |
| Published online | 26 September 2025 | |
- R. Girimurugan, P. Rajasekaran, Ganesh Babu Loganathan, A. G. Gandhi, Harishchander Anandaram, R. Edwin Josep, Influence of E-Glass Fiber Addition on Mechanical Properties of Jute Fiber Reinforced Hybrid Composites. International Journal of Vehicle Structures & Systems 16, 723-727 (2024). [Google Scholar]
- D. Sen, C. Nayak, K. G. Sudhakar, S. Birla, Mechanical properties of fabricated hybrid composites infused with Heat-Treated alkali sisal fiber and SiC particles: a quantitative analysis. Polymer Bulletin. 78, (2021). [Google Scholar]
- P. Surya, B.A. Kumar, S. Magibalan, Enhancing Mechanical Properties of Hybrid Natural Fiber Reinforced Epoxy Composites with Acacia Mangium Fiber and Teak Wood Powder. E3S Web of Conferences. 559, 02011(2024). [Google Scholar]
- P. Thangavel, S. Vignesh, R. Sureshkumar, A. Gowrishankar, R. Girimurugan, Study on mechanical properties of polylactic acid matrix added with fly ash and tamarind kernel powder micro fillers. Nano World Journal. 9, 626 (2023). [Google Scholar]
- B. Brailson Mansingh, J. S. Binoj, A. Amala Mithin Minther Singh, A. Sagai Francis Britto, Influence of SiC nanoparticles on properties of alkali-treated areca fruit husk fiber/hybrid polymer composites. J Appl Polym Sci. 140, (2023). [Google Scholar]
- R. Vijayan, E. Natarajan, K. Palanikumar, A. Krishnamoorthy, K. Markandan, S. Ramesh, Effect of hybridization and stacking sequences on mechanical properties and thermal stability of aloe vera-roselle-glass fiber reinforced polymer composites. Polym Compos. 44, (2023). [Google Scholar]
- M.M.A. Mahasin, V. Gowrisankar, S. Hariharan, S.S. Ameen, Mechanical Characterization and Modeling of Sisal, Jute, and Coir Fiber-Reinforced Polypropylene Composites. Journal of Physics: Conference Series. 3045, 012004 (2025). [Google Scholar]
- Z. U. Arif, M. Y. Khalid, M. F. Sheikh, A. Zolfagharian, M. Bodaghi, Biopolymeric sustainable materials and their emerging applications. J Environ Chem Eng. 10, (2022). [Google Scholar]
- X. Xu, H. Chen, B. Fei, W. Zhang, T. Zhong,Effects of age, particle size and moisture content on physical and mechanical properties of moso bamboo non-glue bonded composites. Journal of Forestry Engineering. 8, (2023). [Google Scholar]
- S. A. Awad, M. Jawaid, A. S. Ismail, E. M. Khalaf, B. Abu-Jdayil,Dimension stability, tensile and thermomechanical properties of bamboo/oil palm fibre reinforced bio- epoxy hybrid biocomposites. Journal of Materials Research and Technology. 30,(2024). [Google Scholar]
- S. Mousa, A. S. Alomari, S. Vantadori, W. H. Alhazmi, A. A. Abd-Elhady, H. E.-D. M. Sallam, Mechanical Behavior of Epoxy Reinforced by Hybrid Short Palm/Glass Fibers. Sustainability (Switzerland). 14, (2022). [Google Scholar]
- H. Dutta, P. Gurusamy, S. Halder, Enhancement of thermal and mechanical properties of polymer composite using a novel milled bamboo filler. Polym Compos. 44, (2023). [Google Scholar]
- S. Dixit, B. Joshi, P. Kumar, V. L. Yadav, Novel Hybrid Structural Biocomposites from Alkali Treated-Date Palm and Coir Fibers: Morphology, Thermal and Mechanical Properties. J Polym Environ. 28, (2020). [Google Scholar]
- X. Yang, M. Wang, Y. Li, W. Wang, and Y. Liu, Improvement of mechanical and thermal expansion properties of pectinase treatment plant fiber reinforced starch/PBAT composites. Polym Compos. 45, (2024). [Google Scholar]
- S. Muruganantham, M. Marappan, D. Ravichandran, S. Jeeva, R. Gopalakrishnan, S. Harikeswaran, C.J. Dhas, Effectiveness of loading and alkali treated fibers in improving mechanical characteristics of hybrid flax/bamboo polyester composites. AIP Conference Proceedings. 3306, 070004 (2025). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.