Open Access
| Issue |
EPJ Web Conf.
Volume 336, 2025
International Conference on Sustainable Development in Advanced Materials, Manufacturing, and Industry 4.0 (INSDAM’25)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 13 | |
| Section | Advanced Materials | |
| DOI | https://doi.org/10.1051/epjconf/202533601007 | |
| Published online | 26 September 2025 | |
- J. Kassim and H. Hashim, Experimental and mathematical research of convection heat transfer for a high integral finned tube heat exchanger. J. Eng. Sustain. Dev. 23(6), 70–83 (2019). https://doi.org/10.22124/jesd.2019.14087 [Google Scholar]
- M. S. Kassim and H. S. Gaber, Investigation of convection heat transfer for high integral finned tube heat exchanger. (2020). DOI unavailable. [Google Scholar]
- D. Luo, S. Yang, Y. Yan, J. Cao, and B. Y. Cao, Performance improvement of the automotive thermoelectric generator by extending the hot side area of the heat exchanger through heat pipes. Energy Rep. (2021). https://doi.org/10.1016/j.egyr.2021.02.008 [Google Scholar]
- X. Liu and Y. Chen, Transient thermal performance analysis of micro heat pipe. Int. J. Heat Mass Transf. 123, 456–467 (2018). https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.041 [Google Scholar]
- R. W. MacGregor, P. A. Kew, and D. A. Reay, Investigation of low global heating potential working fluids for a closed two-phase thermosiphon. Appl. Therm. Eng. 175, 115338 (2020). https://doi.org/10.1016/j.applthermaleng.2020.115338 [Google Scholar]
- M. Mameli, L. Araneo, S. Filippeschi, L. Marelli, R. Testa, and M. Marengo, Thermal response of a closed loop pulsating heat pipe under a varying gravity force. Int. J. Therm. Sci. 139, 108–119 (2019). https://doi.org/10.1016/j.ijthermalsci.2019.04.017 [Google Scholar]
- M. Miscevic, G. El Achkar, P. Lavieille, A. Kaled, and S. Dutour, About flow regime and heat transfer in low diameter condenser of LHP and CPL. Heat Mass Transf. 57, 2345–2355 (2021). https://doi.org/10.1007/s00231-021-02955-5 [Google Scholar]
- D. Mishkinis, P. Prado, R. Sanz, and A. Torres, Development of LHP for intermediate temperature range. Appl. Therm. Eng. 178, 115462 (2020). https://doi.org/10.1016/j.applthermaleng.2020.115462 [Google Scholar]
- L. Mottet, T. Coquard, and M. Prat, Three-dimensional liquid and vapor distribution in the wick of capillary evaporators. Int. J. Heat Mass Transf. 118, 35–46 (2018). https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.080 [Google Scholar]
- V. S. Nikolayev, Dynamics of the triple contact line on a non-isothermal heater at partial wetting. J. Colloid Interface Sci. 487, 302–314 (2017). https://doi.org/10.1016/j.jcis.2016.11.070 [Google Scholar]
- V. S. Nikolayev, A dynamic film model of the pulsating heat pipe. Int. J. Heat Mass Transf. 135, 736–748 (2019). https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.016 [Google Scholar]
- M. Nishikawara, H. Nagano, and T. Kaya, Transient thermo-fluid modeling of loop heat pipe and experimental validation. Appl. Therm. Eng. 188, 116611 (2021). https://doi.org/10.1016/j.applthermaleng.2021.116611 [Google Scholar]
- N. Kim and S. Kim, Self-convectional three-dimensional integrated circuit cooling system using micro flat heat pipe for portable devices. Microelectron. J. 96, 51–61 (2020). https://doi.org/10.1016/j.mejo.2020.104899 [Google Scholar]
- E. W. Washburn, International Critical Tables of Numerical Data, Physics, Chemistry and Technology. National Research Council, The National Academies Press, Washington, D.C. (1930). [Google Scholar]
- J. P. Holman, Experimental Methods for Engineers, 7th ed. McGraw-Hill, New York (2007). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.