Open Access
| Issue |
EPJ Web Conf.
Volume 336, 2025
International Conference on Sustainable Development in Advanced Materials, Manufacturing, and Industry 4.0 (INSDAM’25)
|
|
|---|---|---|
| Article Number | 01010 | |
| Number of page(s) | 7 | |
| Section | Advanced Materials | |
| DOI | https://doi.org/10.1051/epjconf/202533601010 | |
| Published online | 25 November 2025 | |
- J.C. Caraschi, A.L. Leãto, Characterization of curaua fiber. Mol. Cryst. Liq. Cryst. Sci. Technol. Sect. A Mol. Cryst. Liq. Cryst. 353, 149–152 (2000). [Google Scholar]
- K. Mayandi, N. Rajini, P. Pitchipoo, V.S. Sreenivasan, J.T. Winowlin Jappes, A. Alavudeen, A comparative study on characterizations of Cissus quadrangularis and Phoenix reclinata natural fibres. Journal of Reinforced Plastics and Composites 34, 269–280 (2015) [Google Scholar]
- A.P. Harsha, A.A. Thakre, Investigation on solid particle erosion behaviour of polyetherimide and its composites. Wear. 262, 807–818 (2007). [Google Scholar]
- H.S.A. Junior, S.N. Monteiro, L.H.L. Louro, T.S. de Araujo, J.W. Drelich, Charpy impact test on epoxy matrix composites reinforced with waste fabric. Compos. Part B Eng. 55, 492–497 (2013). [Google Scholar]
- C.C. Angrizani, M.O. Cioffi, A.J. Zattera, S.C. Amico, Analysis of curaua/glass hybrid interlayer laminates. J. Reinf. Plast. Compos. 33, 472–478 (2014). [Google Scholar]
- B. Soares, R. Preto, L. Sousa, L. Reis, Mechanical behavior of basalt fibers in a basalt–UP composite. Procedia Struct. Integr. 1, 82–89 (2016). [Google Scholar]
- Z. Lu, G. Xian, H. Li, Effects of elevated temperatures on the mechanical properties of basalt fibers and BFRP plates. Constr. Build. Mater. 127, 1029–1036 (2016). [Google Scholar]
- R. Prithivirajan, S. Jayabal, S.K. Sundaram, V. Sangeetha, Hybrid biocomposites from agricultural residues: mechanical, water absorption and tribological behaviors. J. Polym. Eng. 36, 663–671 (2016). [Google Scholar]
- P.A. Sreekumar, K. Joseph, G. Unnikrishnan, S. Thomas, A comparative study on mechanical properties of sisal-leaf fibre-reinforced polyester composites prepared by resin transfer and compression moulding techniques. Compos. Sci. Technol. 67, 453–461 (2007). [Google Scholar]
- S. Vigneshwaran, M. Uthayakumar, V. Arumugaprabu, A review on erosion studies of fiber-reinforced polymer composites. J. Reinf. Plast. Compos. 36, 1019–1027 (2017). [Google Scholar]
- R.D.J. Johnson, V. Arumugaprabu, M. Uthayakumar, S. Vigneshwaran, V. Manikandan, C. Bennet, Erosion performance studies on Sansevieria cylindrica reinforced vinylester composite. Mater. Res. Express 5, 035309 (2018). [Google Scholar]
- N. Miyazaki, Solid particle erosion of composite materials: A critical review. J. Compos. Mater. 50, 3175–3217 (2016). [Google Scholar]
- S. Krishnasamy, S. Irulappasamy, S.M.K. Thiagamani, R.A. Ilyas, P.S. Khoo, Examining the mechanical properties of hybrid curauá–basalt reinforced polyester composites. Polym. Compos. (2025). https://doi.org/10.1002/pc.29694 [Google Scholar]
- V. Ganesan, J.S. Chohan, K. Gengappan, P. Paramasivam, R. Maranan, N. Lakshmaiya, S.K. Shanmugam, Mechanical and structural characterization of curauá fiber, sugarcane biochar, and poly(lactic acid) hybrid green composites for sustainable biomass utilization. Sugar Tech (2025), 1–22. https://doi.org/10.1007/s12355-025-01628-9 [Google Scholar]
- M. Barkoula, J. Karger-Kocsis, Effects of fibre content and relative fibre orientation on the solid particle erosion of GF/PP composites. Wear 252, 80–87 (2002). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.