EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 340 (2025) EPJ Web Conf., 340 (2025) 11007 References
Open Access
Issue
EPJ Web Conf.
Volume 340, 2025
Powders & Grains 2025 – 10th International Conference on Micromechanics on Granular Media
Article Number 11007
Number of page(s) 4
Section Powders and Grains in Pharma- and Food Processes
DOI https://doi.org/10.1051/epjconf/202534011007
Published online 01 December 2025
  1. E. C. Ferré, J. W. Geissman, M. S. Zechmeister, Magnetic properties of fault pseudotachylytes in granites, J. Geophys. Res. Solid Earth. 117, 1–25 (2012) [Google Scholar]
  2. J. Pei, Z. Zhou, S. Dong, L. Tang, Magnetic evidence revealing frictional heating from fault rocks in granites, Tectonophysics. 637, 207-217 (2014) [Google Scholar]
  3. I. Cotabarren, T. A. Omar, F. J. Muzzio, Binder-free twin-screw melt granulation: An effective approach to manufacture high-dose API formulations, Int. J. Pharm. 606, 120886 (2021) [Google Scholar]
  4. D. H. Wagner, S. Ramanathan, M. L. Taylor, A. B. Brown, M. E. Staben Wobker, M. W. Prior, The thermodynamics of high shear blending, Powder Technol. 193, 195-199 (2009) [Google Scholar]
  5. M. Djokić, K. Kachrimanis, L. Solomun, J. Djuriš, D. Vasiljević, S. Ibrić, A study of jet-milling and spraydrying process for the physicochemical and aerodynamic dispersion properties of amiloride HCl, Powder Technol. 262, 170-176 (2014) [Google Scholar]
  6. K. S. Venkataraman, K. S. Narayanan, Energetics of collision between grinding media in ball mills and mechanochemical effects, Powder Technol. 96, 190-201 (1998) [Google Scholar]
  7. L. Takacs, Self-sustaining reactions induced by ball milling, Prog. Mater. Sci. 47, 355-414 (2002) [CrossRef] [Google Scholar]
  8. R. Schlem, C. F. Burmeister, P. Michalowski, S. Ohno, G. F. Dewald, A. Kwade, W. G. Zeier, Energy Storage Materials for Solid-State Batteries: Design by Mechanochemistry, Adv. Energy Mater. 11, 2101022 (2021) [Google Scholar]
  9. Z. Sun, H. Zhu, J. Hua, Granular flow characteristics and heat generation mechanisms in an agitating drum with sphere particles: Numerical modeling and experiments, Powder Technol. 339, 149–166 (2018) [Google Scholar]
  10. F. Kisuka, R. L. Rangel, C. Hare, V. Vivacqua, C. Y. Wu, Experimental investigation of heat generation during the mixing of granular materials using an overhead stirrer, AIChE J. e18219, 1-12 (2023) [Google Scholar]
  11. R. L. Rangel, F. Kisuka, C. Hare, V. Vivacqua, A. Franci, E. Oñate, C. Y. Wu, Experimental investigation of heat generation during granular flow in a rotating drum using infrared thermography, Powder Technol. 426, 118619 (2023) [Google Scholar]
  12. D. Richard, I. Lordanoff, M. Renouf, Y. Berthier, Thermal study of the dry sliding contact with third body presence, J. Tribol. 130, 1-10 (2008) [Google Scholar]
  13. V. D. Nguyen, J. Fortin, M. Guessasma, E. Bellenger, C. Cogné, Thermomechanical modelling of friction effects in granular flows using the discrete element method, J. Mech. Mater. Struct. 4, 413-426 (2009) [Google Scholar]
  14. V. D. Nguyen, C. Cogné, M. Guessasma, E. Bellenger, J. Fortin, Discrete modeling of granular flow with thermal transfer: Application to the discharge of silos, Appl. Therm. Eng. 29, 1846-1853 (2009) [Google Scholar]
  15. J. Rojek, Discrete element thermomechanical modelling of rock cutting with valuation of tool wear, Comput. Part. Mech. 1, 71-84 (2014) [Google Scholar]
  16. B. Chaudhuri, F. J. Muzzio, M. S. Tomassone, Modeling of heat transfer in granular flow in rotating vessels, Chem. Eng. Sci. 61, 6348-6360 (2006) [Google Scholar]
  17. C. Hartmanshenn, M. Halota, P. Chaksmithanont, C. Leung, J. G. Khinast, C. D. Papageorgiou, C. Mitchell, J. L. Quon, B. J. Glasser, Scale up of heat transfer for dry granular material in a cylindrical bladed mixer, Powder Technol. 385, 336-347 (2021) [Google Scholar]
  18. J. Gan, Z. Zhou, A. Yu, Particle scale study of heat transfer in packed and fluidized beds of ellipsoidal particles, Chem. Eng. Sci. 144, 201-215 (2016) [Google Scholar]
  19. J. Hu, R. L. Rangel, F. Kisuka, L. Zhang, S. Yin, C. Y. Wu, DEM analysis of heat generation and transfer during granular flow in a rotating drum, Chem. Eng. J. 499, 155945 (2024) [Google Scholar]
  20. X. Tian, F. E. Kennedy, Maximum and average flash temperatures in sliding contacts, J. Tribol. 116, 167-174 (1994) [Google Scholar]
  21. R. L. Rangel, A. Cornejo, E. Oñate, A. Franci, Efficient discrete element modeling of heat generation and transfer in granular flows: Validation and application, Powder Technol. 439, 119719 (2024) [Google Scholar]
  22. G. J. Cheng, A. B. Yu, P. Zulli, Evaluation of effective thermal conductivity from the structure of a packed bed, Chem. Eng. Sci. 54, 4199–4209 (1999) [Google Scholar]
  23. D. Liu, X. Chen, W. Zhou, C. Zhao, Simulation of char and propane combustion in a fluidized bed by extending DEM-CFD approach, Proc. Combust. Inst. 33, 2701-2708 (2011) [Google Scholar]
  24. J. Hu, C. Pei, L. Zhang, C. Liang, C. Y. Wu, Numerical analysis of frictional charging and electrostatic interaction of particles, AIChE J. 68, 17444 (2022) [Google Scholar]
  25. M. Kremmer, J. F. Favier, A method for representing boundaries in discrete element modelling - Part I: Geometry and contact detection, Int. J. Numer. Methods Eng. 51, 1407-1421 (2001) [Google Scholar]
  26. C. Pei, C. Y. Wu, M. Adams, Numerical analysis of contact electrification of non-spherical particles in a rotating drum, Powder Technol. 285, 110-122 (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.