Open Access
| Issue |
EPJ Web Conf.
Volume 343, 2025
1st International Conference on Advances and Innovations in Mechanical, Aerospace, and Civil Engineering (AIMACE-2025)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 12 | |
| Section | Advances in Mechanical Engineering | |
| DOI | https://doi.org/10.1051/epjconf/202534301007 | |
| Published online | 19 December 2025 | |
- C. Huang, X. Qian, R. Yang, Thermal conductivity of polymers and polymer nanocomposites. Mater. Sci. Eng. R Rep. 132, 1–22 (2018) [Google Scholar]
- Z. Cai, et al., Progress of polymer-based thermally conductive materials by fused filament fabrication: a comprehensive review. Polymers 14, 4297 (2022) [Google Scholar]
- P. Roudny, T. Syrovy, Thermal conductive composites for FDM 3D printing: A review, opportunities and obstacles, future directions. J. Manuf. Process. 83, 667–677 (2022) [Google Scholar]
- J. Liu, et al., Improved thermal conductivity of thermoplastic polyurethane via aligned boron nitride platelets assisted by 3D printing. Compos. Part A Appl. Sci. Manuf. 120, 140–146 (2019) [Google Scholar]
- R.K. Goyal, et al., Electrical properties of polymer/expanded graphite nanocomposites with low percolation. J. Phys. D Appl. Phys. 43, 365404 (2010) [Google Scholar]
- V. Kishore, et al., Additive manufacturing of high-performance semicrystalline thermoplastics and their composites. (2016) [Google Scholar]
- X. Wang, et al., Aerogel perfusion-prepared h-BN/CNF composite film with multiple thermally conductive pathways and high thermal conductivity. Nanomaterials 9, 1051 (2019) [Google Scholar]
- C. Gautam, et al., 3D interconnected architecture of h-BN reinforced ZrO2 composites: structural evolution and enhanced mechanical properties for bone implant applications. Ceram. Int. 45, 1037–1048 (2019) [Google Scholar]
- Z.O. Pehlivanli, H3BO3/PP kompozitlerinin isi iletim katsayilarrnrn incelenmesi. Gazi Univ. J. Sci. Part C Des. Technol. 4, 91–96 (2016) [Google Scholar]
- Y. Geng, et al., Enhanced through-plane thermal conductivity of polyamide six composites with vertical alignment of boron nitride achieved by fused deposition modelling. Polym. Compos. 40, 3375–3382 (2019) [Google Scholar]
- P. Roudny, T. Syrovy, Thermal conductive composites for FDM 3D printing: A review, opportunities and obstacles, future directions. J. Manuf. Process. 83, 667–677 (2022) [Google Scholar]
- B.P. Croom, et al., Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites. Addit. Manuf. 37, 101701 (2021) [Google Scholar]
- T. Beran, et al., Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers. Addit. Manuf. 23, 206–214 (2018) [Google Scholar]
- H. Zhang, et al., Fibre bridging and nozzle clogging in 3D printing of discontinuous carbon fiber-reinforced polymer composites: Coupled CFD-DEM modelling. Int. J. Adv. Manuf. Technol. 117, 3549–3562 (2021) [Google Scholar]
- A. Mueller, et al., Numerical design and optimization of a novel heatsink using ANSYS steady-state thermal analysis, in Proceedings of the 2020 27th International Workshop on Electric Drives: MPEIDepartment of Electric Drives 90th Anniversary (IWED) (IEEE, 2020) p. 1–5. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.