EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 344 (2025) EPJ Web Conf., 344 (2025) 01014 References
Open Access
Issue
EPJ Web Conf.
Volume 344, 2025
AI-Integrated Physics, Technology, and Engineering Conference (AIPTEC 2025)
Article Number 01014
Number of page(s) 8
Section AI-Integrated Physics, Technology, and Engineering
DOI https://doi.org/10.1051/epjconf/202534401014
Published online 22 December 2025
  1. L. DeWitte, C. Saldana, T. Kurfess, and K. Fu, Effect of coaxial nozzle wear on catchment efficiency in direct energy deposition built components. J. Manuf. Syst. 63, 524–538 (2022). https://doi.org/10.1016/j.jmsy.2022.05.004 [Google Scholar]
  2. B. Han et al., Prediction of deposit characteristics based on the discrete coaxial nozzle during laser direct metal deposition. Opt. Laser Technol. 163, 109385 (2023). https://doi.org/10.1016/j.optlastec.2023.109385 [Google Scholar]
  3. K. Wang et al., Powder stream performance of a novel annular laser direct metal deposition with inside-laser coaxial powder feeding nozzle: Simulation and experimental perspectives. Opt. Laser Technol. 175, 110723 (2024). https://doi.org/10.1016/j.optlastec.2024.110723 [Google Scholar]
  4. F. Demir and O. Turgut, Study of heat transfer and flow field of coaxial round and swirl impinging jets on flat and finned plates via experimental and numerical approaches. Thermal Sci. Eng. Prog. 65, 103867 (2025). https://doi.org/10.1016/j.tsep.2025.103867 [Google Scholar]
  5. A. Ramakrishnan, S. Kotha, A. Salem, and G. Dinda, Directed energy deposition of radially functionally graded nickel based superalloys IN625 and IN738: Microstructure and mechanical properties. J. Alloys Compd. 1016, 178964 (2025). https://doi.org/10.1016/j.jallcom.2025.178964 [Google Scholar]
  6. J. Jang, Y. Shin, J. Lee, and S. H. Lee, Precipitation behavior and grain growth of Inconel 718 deposited by induction heating-assisted laser directed energy deposition. Addit. Manuf. 100, 104678 (2025). https://doi.org/10.1016/j.addma.2025.104678 [Google Scholar]
  7. C. Guo, Y. Sun, Q. Li, H. Yue, and C. Wang, Analysis of the agglomeration of powder in a coaxial powder feeding nozzle used for laser energy deposition. Fluid Dyn. Mater. Process. 17, 349–370 (2021). https://doi.org/10.32604/fdmp.2021.013535 [Google Scholar]
  8. X. Shi, D. Gu, G. Huang, and Y. Li, Laser directed energy deposition remanufacturing of LPBF- processed TA15 parts: Hybrid process interface induced microstructure inheritance and mechanical performance. J. Mater. Res. Technol. 33, 3000–3011 (2024). https://doi.org/10.1016/j.jmrt.2024.10.018 [Google Scholar]
  9. S. A. Khairallah et al., High fidelity model of directed energy deposition: Laser-powder-melt pool interaction and effect of laser beam profile on solidification microstructure. Addit. Manuf. 73, 103684 (2023). https://doi.org/10.1016/j.addma.2023.103684 [Google Scholar]
  10. A. López-Martínez et al., Modeling and comparison of the powder flow dynamics for tilted annular and discrete-outlet nozzles in laser directed energy deposition. J. Manuf. Process. 99, 687–704 (2023). https://doi.org/10.1016/j.jmapro.2023.05.039 [Google Scholar]
  11. S. J. L. Bremer, M. Luckabauer, and G. R. B. E. Römer, Laser intensity profile as a means to steer microstructure of deposited tracks in directed energy deposition. Mater. Des. 227, 111725 (2023). https://doi.org/10.1016/j.matdes.2023.111725 [Google Scholar]
  12. M. O. Gushchina et al., Features of the Ti-6Al-4V microstructure and phase composition formation by changing the thermal cycle during the process of direct energy deposition. Mater. Charact. 227, 115330 (2025). https://doi.org/10.1016/j.matchar.2025.115330 [Google Scholar]
  13. H. Liu, H. Chen, and J. Xiong, Abnormal melt pool behavior in overhead wire arc-based directed energy deposition. J. Manuf. Process. 150, 1164–1177 (2025). https://doi.org/10.1016/j.jmapro.2025.07.020 [Google Scholar]
  14. W. Zhang et al., Microstructural evolution and mechanical property enhancement: Thin-walled structures of an Inconel 718 superalloy fabricated via hybrid laser–arc directed energy deposition. Mater. Sci. Eng. A 940, 148522 (2025). https://doi.org/10.1016/j.msea.2025.148522 [Google Scholar]
  15. Q. Liu, W. Li, K. Yang, Y. Gao, L. Wang, and X. Chu, Analytical investigation into the powder distribution and laser beam-powder flow interaction in laser direct energy deposition with a continuous coaxial nozzle. Adv. Powder Technol. 34, 104058 (2023). https://doi.org/10.1016/j.apt.2023.104058 [Google Scholar]
  16. H. S. Kim and S. H. Park, Influence of high powder flow dynamics on the efficiency of laser-directed energy deposition. Mater. Des. 255, 114145 (2025). https://doi.org/10.1016/j.matdes.2025.114145. [Google Scholar]
  17. S. B. Lawson, D. Yan, A. Tabei, B. K. Paul, and S. Pasebani, Numerical modeling of coaxial wire- powder laser directed energy deposition process in dissimilar metal additive manufacturing. Results Mater. 26, 100701 (2025). https://doi.org/10.1016/j.rinma.2025.100701 [Google Scholar]
  18. M. Ostolaza, A. Urresti, J. I. Arrizubieta, A. Lamikiz, and M. Ortiz, CFD simulation for the modelling of the powder flow on continuous coaxial nozzles in the laser DED process. Procedia CIRP 111, 282–286 (2022). https://doi.org/10.1016/j.procir.2022.08.022 [Google Scholar]
  19. E. Kim et al., Effects of growth rate and dynamic substrate tilt on properties of Au-Ta alloy films deposited by high-power impulse magnetron sputtering. Surf. Coat. Technol. 493, 131231 (2024). https://doi.org/10.1016/j.surfcoat.2024.131231 [Google Scholar]
  20. P. Zhao, H. Wei, K. Zheng, Y. Lei, B. Li, and Y. Zhang, Modeling method for predicting part-scale geometric morphology considering manufacturing system states of laser-based directed energy deposition. Opt. Laser Technol. 192, 113531 (2025). https://doi.org/10.1016/j.optlastec.2025.113531 [Google Scholar]
  21. J. Tu et al., Microstructure evolution and mechanical properties of Al0.5CoCrFeNi high- entropy alloy fabricated by direct energy deposition. J. Alloys Compd. 1036, 181620 (2025). https://doi.org/10.1016/j.jallcom.2025.181620 [Google Scholar]
  22. Y. Wu, K. Liu, J. Li, J. Wang, and N. Soboleva, A review on formation and suppression mechanisms of porosity and cracks in wire arc-directed energy deposition Al-Zn-Mg-Cu alloys. J. Manuf. Process. 148, 173–211 (2025). https://doi.org/10.1016/j.jmapro.2025.05.017 [Google Scholar]
  23. Y. Mao, H. Chen, and J. Xiong, A novel pre-melted liquid filler laser directed energy deposition for Al alloy: Process behaviors and filler transfer characteristics. Int. J. Heat Mass Transf. 252, 127431 (2025). https://doi.org/10.1016/j.ijheatmasstransfer.2025.127431 [Google Scholar]
  24. M. Ostolaza, J. I. Arrizubieta, and A. Lamikiz, CFD modelling of the powder segregation in multi- material laser directed energy deposition. Int. J. Therm. Sci. 198, 108885 (2024). https://doi.org/10.1016/j.ijthermalsci.2024.108885 [Google Scholar]
  25. T. Mede and M. Godec, Relevance of inter-particle interaction in directed energy deposition powder stream. Powder Technol. 435, 119393 (2024). https://doi.org/10.1016/j.powtec.2024.119393 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.