Experimental study on the effect of austenitic stainless steel filler wires (AISI 308L & AISI 304L) on the metallurgical and mechanical properties of ferritic stainless steel AISI 409 welds

Open Access

Issue		EPJ Web Conf. Volume 345, 2026 4^th International Conference & Exposition on Materials, Manufacturing and Modelling Techniques (ICE3MT2025)


Article Number		01010
Number of page(s)		12
DOI		https://doi.org/10.1051/epjconf/202634501010
Published online		07 January 2026

M. O. H. Amuda, E. T. Akinlabi, and S. Mridha c, “Influences of Energy Input and Metal Powder Addition on Carbide Precipitation in AISI 430 Ferritic Stainless-Steel Welds,” Mater. Today Proc. 4 (2), Part A, pp. 234–243, (2017). https://doi.org/10.1016/j.matpr.2017.01.017. [Google Scholar]
K. A. Cashell and N. R. Baddoo, “Ferritic stainless steels in structural applications,” Thin-Walled Struct., 83, pp. 169–181, (2014). https://doi.org/10.1016/j.tws.2014.03.014. [Google Scholar]
B. Kuhn, M. Talik, T. Fischer, X. Fan, Y. Yamamoto, and J. Lopez Barrilao, “Science and Technology of High Performance Ferritic (HiperFer) Stainless Steels,” Metals, 10 (2) (2020). https://doi.org/10.3390/met10040463. [Google Scholar]
T. Nagata, J. Mizuno, S. Iimura, M. Ito, and M. Masaki, “Prediction of Fatigue Strength of Motorcycle Exhaust System in Higher Temperature Range,” SAE International, Jan. (2022). https://doi.org/10.4271/2022-32-0011. [Google Scholar]
T. Patil et al., “Experimental investigation on solidification cracking & intergranular corrosion of AISI 321 & AISI 316 L dissimilar weld on pulsed current gas tungsten arc welding (PCGTAW),” Heliyon, 10 (15), pp. e34648, (2024) https://doi.org/10.1016/j.heliyon.2024.e34648. [Google Scholar]
B. Jose, M. Manoharan, A. Natarajan, N. R. Muktinutalapati, G. Madhusudhan Reddy, and S. D. Meshram, “Current research and developments in welding of 18% nickel maraging steel,” Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., 237 (6), pp. 1295–1318, (2023). https://doi.org/10.1177/14644207221142516. [Google Scholar]
I. Bahadır, V. Onar, and A. Uluköy, “Investigation of the Mechanical Properties of AISI 304 Austenitic Stainless-Steel Joints Produced by TIG and MIG Welding Methods using 308L Filler Wire,” Int. J. Innov. Res. Sci. Eng. Technol., 6 (10), pp. 5–12, (2017). [Google Scholar]
I. Dinaharan, T. Muthu Krishnan, R. Palanivel, and T.-C. Jen, “Microstructure and tensile behavior of CO2 laser beam welded AISI 409 ferritic stainless-steel tubes,” Mater. Chem. Phys., 309, p. 128440, (2023), https://doi.org/10.1016/j.matchemphys.(2023).128440. [Google Scholar]
S. Kumar Gupta, S. Mehrotra, A. Ravi Raja, M. Vashista, and M. Z. Khan Yusufzai, “Effect of Welding Speed on Weld Bead Geometry and Percentage Dilution in Gas Metal Arc Welding of SS409L,” Mater. Today Proc., 18, pp. 5032–5039, (2019). https://doi.org/10.1016/j.matpr.2019.07.497. [Google Scholar]
M. Keskitalo, J. Sundqvist, K. Mäntyjärvi, J. Powell, and A. F. H. Kaplan, “The Influence of Shielding Gas and Heat Input on the Mechanical Properties of Laser Welds in Ferritic Stainless Steel,” Phys. Procedia, 78, pp. 222–229, (2015). https://doi.org/10.1016/j.phpro.2015.11.032. [Google Scholar]
V. S. P. Shiv Chauhan, Shripadraj Ponkshe, “Evaluation of Ferritic Stainless-Steel Performance in Exhaust Environment,” in 10th SAE India International Mobility Conference, (2022). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.