Open Access
| Issue |
EPJ Web Conf.
Volume 345, 2026
4th International Conference & Exposition on Materials, Manufacturing and Modelling Techniques (ICE3MT2025)
|
|
|---|---|---|
| Article Number | 01015 | |
| Number of page(s) | 14 | |
| DOI | https://doi.org/10.1051/epjconf/202634501015 | |
| Published online | 07 January 2026 | |
- A. Pugazhenthi, I. Dinaharan, G. Kanagaraj, J. David Raja Selvam, Predicting the effect of machining parameters on turning characteristics of AA7075/ TiB2 in situ aluminum matrix composites using empirical relationships, J. Braz. Soc. Mech. Sci. Eng., 1-15 (2018). https://doi.org/10.1007/s40430-018-1480-2 [Google Scholar]
- S. Chintada, S. Dora, R. Prathipati, Investigations on the machinability of Al/SiC/RHA hybrid metal matrix composites, Silicon, 1-12 (2019). https://doi.org/10.1007/s12633- 019-0080-9 [Google Scholar]
- E. Baburaj, K. Sundaram, P. Senthil, Effect of high speed turning operation on ‘SR’ of hybrid metal matrix (Al-SiCp-fly ash) composite, J. Mech. Sci. Technol. 30(1), 89-95 (2016). https://doi.org/10.1007/s12206-015-1210-y [Google Scholar]
- Y. Wang, W. Liao, K. Yang, W. Chen, T. Liu, Investigation on cutting mechanism of SiCp/Al composites in precision turning, Int. J. Adv. Manuf. Technol., 1-10 (2018). https://doi.org/10.1007/s00170-018-2650-1 [Google Scholar]
- J.C. Aurich, M. Zimmermann, S Schindler, P. Steinmann, Turning of aluminum metal matrix composites: influence of the reinforcement and the cutting condition on the surface layer of the workpiece, Adv. Manuf., Shanghai University and Springer-Verlag Berlin Heidelberg, 1-12 (2016). https://doi.org/10.1007/s40436-016-0152-7 [Google Scholar]
- S. Basavarajappa, Tool Wear in Turning of Graphitic Hybrid Metal Matrix Composites, Mater. Manuf. Processes, 24, 484–487 (2009). https://doi.org/10.1080/10426910802714431 [Google Scholar]
- A. Kannan, R. Mohan, R. Viswanathan, N Sivashankar, Experimental investigation on ‘SR’, Tool wear and cutting force in turning of hybrid (Al7075+SiC+Gr) metal matrix composites, J. Mater. Res. Technol., 1-27 (2020). https://doi.org/10.1016/j.jmrt.2020.11.074 [Google Scholar]
- D. Kishorea, K. Prahlada Rao, A. Mahamani, Investigation of cutting force, ‘SR’ and flank wear in turning of In-situ Al6061-TiC metal matrix composite, Procedia Mater. Sci. 6, 1040 – 1050 (2014).https://doi.org/10.1016/j.mspro.2014.07.175 [Google Scholar]
- S. Sivasankaran, E. Saminathanb, S. Siddharthb, Effect of graphite addition on turning of AA 7075- ZrB2 in-situ composites, Procedia Mater. Sci. 5, 2122 – 2131 (2014). https://doi.org/10.1016/j.mspro.2014.07.548 [Google Scholar]
- S. Chinchanikar, P. Kulkarni, Machining effects and multi-objective optimization in Inconel 718 turning with unitary and hybrid nanofluids under MQL. Fracture and Structural Integrity 18(68), 222-241(2024).https://doi.org/10.3221/IGF-ESIS.68.15 [Google Scholar]
- P. Kulkarni, S. Chinchanikar, Machinability of Inconel 718 using unitary and hybrid nanofluids under minimum quantity lubrication. Adv. Mater. Process. Technol. 11(1), 421-449 (2025). https://doi.org/10.17756/nwj.2024-s1-042 [Google Scholar]
- J. Singh, S.S. Gill, A. Mahajan, Experimental investigation and optimizing of turning parameters for machining of al7075-t6 aerospace alloy for reducing the tool wear and surface roughness. J. Mater. Eng. Perform. 33(17), 8745-8756 (2024). https://doi.org/10.1007/s11665-023-08584-z [Google Scholar]
- N.M.M. Mydin, A.N. Dahnel, N.A. Raof, N.M. Khairussaleh, S. Mokhtar, Comparison of tool wear mechanisms during drilling of aluminium alloy 7075 in dry and chilled air conditions. J. Sci. Technol. 14(1), 67-74 (2022).https://doi.org/10.30880/jst.2022.14.01.00 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.