Open Access
| Issue |
EPJ Web Conf.
Volume 355, 2026
4th International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR 2025)
|
|
|---|---|---|
| Article Number | 05008 | |
| Number of page(s) | 7 | |
| Section | Sustainable Composites and Mechanical Behavior | |
| DOI | https://doi.org/10.1051/epjconf/202635505008 | |
| Published online | 03 March 2026 | |
- N. K. Singh, B. Sethuraman, Development and Characterization of Aluminium AA7075 Hybrid Composite Foams (AHCFs) Using SiC and TiB₂ Reinforcement. Inter Metalcast. 18, 212 - 227 (2024). https://doi.org/10.1007/s40962-023-01009-6 [Google Scholar]
- N. K. Singh, S. Balaguru, P. Mehta, A. Kaimkuriya, A. K. Namdeo, R. K. Deb, Effect of Reinforcement on Micro Structural and Compressive Deformation Behavior on Closed Cell AA7075 Aluminium Foam. Journal of Mines, Metals and Fuels. 72(2), 179–187 (2024). https://doi.org/10.18311/jmmf/2024/35988 [Google Scholar]
- S. Pan, K. Jin, T. Wang, Z. Zhang, L. Zheng, N. Umehara, Metal matrix nanocomposites in tribology: Manufacturing, performance, and mechanisms. Friction 10, 1596–1634 (2022). https://doi.org/10.1007/s40544-021-0572-7 [Google Scholar]
- M. Merisalu, L. Aarik, J. Kozlova, H. Mändar, A. Tarre, V. Sammelselg, Effective corrosion protection of aluminum alloy AA2024-T3 with novel thin nanostructured oxide coating. Surface and Coatings Technology 411, 126993 (2021). https://doi.org/10.1016/j.surfcoat.2021.126993 [Google Scholar]
- S. Pan, J. Yuan, Michael P. Moodispaw, C. Linsley, J. Liu, Alan A. Luo, A. Taub, X. Li, Corrosion performance of nano-treated aluminum alloy A206 with TiC nanoparticles. Materials and corrosion. 74(3), 419-429 (2023). https://doi.org/10.1002/maco.202213503 [Google Scholar]
- J. Wang, J. Xie, D. Ma, Z. Mao, T. Liang, P. Ying, A. Wang, W. Wang, Effect of deep cryogenic treatment on the microstructure and mechanical properties of Al– Cu–Mg–Ag alloy. J. Mater. Res. Technol. JMR&T. 25, 6880–6885 (2023). https://doi.org/10.1016/j.jmrt.2023.07.130 [Google Scholar]
- X. Niu, Y. Huang, X. Yan, Z. Chen, R. Yuan, H. Zhang, L. Tang, Optimization of Cryogenic Treatment Parameters for the Minimum Residual Stress. J. Mater. Eng. Perform., 27, 3234–3238 (2018). https://doi.org/10.1007/s11665-018-3400-0 [Google Scholar]
- M. Jovicevi c-Klug, R. Rezar, Patricia Jovičević-Klug, B. Podgornik, Influence of deep cryogenic treatment on natural and artificial aging of Al-Mg-Si alloy EN AW 6026. J Alloys Compd. 899, 163323 (2022). https://doi.org/10.1016/j.jallcom.2021.163323 [Google Scholar]
- T. Hong, Y. Shen, J. Geng, D. Chen, X. Li, C. Zhou, Effect of cryogenic pre-treatment on aging behavior of in-situ TiB₂/Al–Cu–Mg composites. Mater Char. 119, 40-46 (2016). https://doi.org/10.1016/j.matchar.2016.07.012 [Google Scholar]
- M. Araghchi, H. Mansouri, R. Vafaei, Yina Guo, A novel cryogenic treatment for reduction of residual stresses in 2024 aluminum alloy. Mater Sci Eng, 689, 48-52 (2017). https://doi.org/10.1016/j.msea.2017.01.095 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.