Open Access
| Issue |
EPJ Web Conf.
Volume 358, 2026
EFM25 – Energy & Fluid Mechanics 2025
|
|
|---|---|---|
| Article Number | 01021 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/epjconf/202635801021 | |
| Published online | 12 March 2026 | |
- J. Dirker. J. P. Meyer, Heat Transfer Coefficients in Concentric Annuli, J. Heat Transfer 124(6), 1200–1203 (2002). https://doi.org/10.1115/1.1517266 [Google Scholar]
- G. Lu, J. Wang, Experimental investigation on heat transfer characteristics of water flow in a narrow annulus, Appl. Therm. Eng. 28(1), 8–13 (2008). https://doi.org/10.1016/j.applthermaleng.2007.03.019 [Google Scholar]
- S. A. Jayarajan, U. Azimov, CFD Modeling and Thermal Analysis of a Cold Plate Design with a Zig-Zag Serpentine Flow Pattern for Li-Ion Batteries, Energies 16(14), 5243 (2023). https://doi.org/10.3390/en16145243 [Google Scholar]
- V. Y. Agbodemegbe, X. Cheng, E. H. Akaho, F. K. Allotey, Correlation for cross-flow resistance coefficient using STAR-CCM+ simulation data for flow of water through rod bundle supported by spacer grid with split-type mixing vane, Nucl. Eng. Des. 285(15), 134–149 (2015). https://doi.org/10.1016/j.nucengdes.2015.01.003 [Google Scholar]
- S. Kastrati, T. Hyhlík, R. Kalinay, Modelling of Evaporation from Thin Horizontal Liquid Film, in Topical Problems of Fluid Mechanics 2018 (Institute of Thermomechanics, AS CR, v.v.i., 2018), 167–174. [Google Scholar]
- B. Maciejewska, M. Piasecka, A. Piasecki, The Study of the Onset of Flow Boiling in Minichannels: Time-Dependent Heat Transfer Results, Heat Transf. Eng. 43(3-5), 223–237 (2021). https://doi.org/10.1080/01457632.2021.1874181 [Google Scholar]
- M. Piasecka, T. Musiał, A. Piasecki, Cooling liquid flow boiling heat transfer in an annular minigap with an enhanced wall, EPJ Web Conf. 213, 02066 (2019). https://doi.org/10.1051/epjconf/201921302066 [Google Scholar]
- B. Maciejewska, P. Łabędzki, A. Piasecki, M. Piasecka, Comparison of FEM calculated heat transfer coefficient in a minichannel using two approaches: Trefftz base functions and ADINA software, EPJ Web Conf. 143, 02070 (2017). https://doi.org/10.1051/epjconf/201714302070 [CrossRef] [EDP Sciences] [Google Scholar]
- A. Pawińska, A. Piasecki, N. Dadas, S. Hożejowska, M. Piasecka, Homotopy Perturbation Method with Trefftz Functions and Simcenter STAR-CCM+ Used for the Analysis of Flow Boiling Heat Transfer, Acta Mech. Autom. 18(2), 233–243 (2024). https://doi.org/10.2478/ama-2024-0027 [Google Scholar]
- R. Eymard, R. Gallouët, T. Herbin, Finite Volume Methods, in Handbook of Numerical Analysis, Vol. 7: Solution of Equation in R (Part 3), Techniques of Scientific Computing (Part 3), (Elsevier, Amsterdam, 2000) [Google Scholar]
- H. Recknagel, E. Sprenger, E.-R. Hönmann, H.-J. Schramek, Taschenbuch für Heizung + Klimatechnik [Handbook for Heating and Air Conditioning], 66th ed., ISBN: 978-3486262124, (Oldenbourg Verlag, Munich, 1991) [Google Scholar]
- Siemens PLM Software Inc., Simcenter STAR-CCM+ Documentation (Siemens PLM Software Inc., Plano, TX, USA, 2020) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.