EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 363 (2026) EPJ Web Conf., 363 (2026) 01012 References
Open Access
Issue
EPJ Web Conf.
Volume 363, 2026
International Conference on Low-Carbon Development and Materials for Solar Energy (ICLDMS’26)
Article Number 01012
Number of page(s) 14
Section Energy Materials
DOI https://doi.org/10.1051/epjconf/202636301012
Published online 16 April 2026
  1. M.T. Mohammed, A.H. Lafta, F.Q. Mohammed. Surface characterization of pure and composite sol-gel nano-coatings deposited on 316L stainless steel for hard tissue replacements. Mater. Res. 26 (2023) e20220479. [Google Scholar]
  2. T.H. Qaid. Properties of Eggshell-Derived Hydroxyapatite Coatings on Titanium Produced by Micro-Arc Oxidation Method. Master’s Thesis, University of Malaya, Malaysia (2019). [Google Scholar]
  3. R. Ahmadi, A. Afshar. In vitro study: Bond strength, electrochemical and biocompatibility evaluations of TiO?/Al2O3 reinforced hydroxyapatite sol-gel coatings on 316L SS. Surf. Coat. Technol. 405 (2021) 126594. [Google Scholar]
  4. E.H. Purwanto, R. Lukiawan, B.B. Louhenapessy, B. Basuki, P. Anggraeni, N.T.E. Darmayanti. Corrosion Resistant Support Materials (CRSM) as potential development of technical parameters for biocompatibility testing of bone implant products: A review. J. Sains Mater. Indones. 26 (2024) 11–23. [Google Scholar]
  5. Tayyeh, A. K., & Hasan, A. F. (2026, February). Enhancing 316L stainless steel for biomedical applications: Advances in surface coatings. In AIP Conference Proceedings (Vol. 3379, No. 1, p. 060027). AIP Publishing LLC. [Google Scholar]
  6. N.S. Radhi, A.J. Salman, Z. Al-Khafaji. Investigation of in vitro behavior of composite coating hydroxyapatite-nano silver on 316L stainless steel substrate by electrophoretic technique for biomedical tools. Open Eng. 14 (2024) 20240017. [Google Scholar]
  7. A.E. Tudose. NiCrAlY layers performance assessment developed onto 310H alloy by EB-PVD method after oxidation in aggressive conditions. NanoBioMat 2024 - Summer Ed. 5 (2024) 45. [Google Scholar]
  8. Mohammadsadegh, A., Allahkaram, S. R., & Gharagozlou, M. (2025). Electrophoretic deposition of chitosan/gelatin/hydroxyapatite nanocomposite coatings on 316 L stainless steel for biomedical applications. Biomedical Materials, 20(1), 015020. [Google Scholar]
  9. M.R. Shirdar, et.al. Hydroxyapatite-titania nanotube composite as a coating layer on Co-Cr-based implants: Mechanical and electrochemical optimization. Ceram. Int. 42 (2016) 6942–6954. [Google Scholar]
  10. Pauline, S. A., Karuppusamy, I., Gopalsamy, K., &Nallaiyan, R. (2025). Template assisted fabrication of nanoporous titanium dioxide coating on 316 L stainless steel for orthopaedic applications. Journal of the Taiwan Institute of Chemical Engineers, 166, 105576. [Google Scholar]
  11. O. Canpolat, A. Canakci, G.G. Gultekin. Effect of HA ratio on the morphology and characteristics of Ti-HA composite coatings on Ti6Al4V-ELI synthesized via mechanical milling. Tribol.-Mater. Surf. Interfaces 18 (2024) 245–255. [Google Scholar]
  12. M. Al-Amin, A.M.A. Rani, A.A.A. Aliyu, M.G. Bryant, M. Danish, A. Ahmad. Bioceramic coatings adhesion and roughness of biomaterials through PM-EDM: A comprehensive review. Mater. Manuf. Process. 35 (2020). [Google Scholar]
  13. A.R. Rafieerad, A.R. Bushroa, B. Nasiri-Tabrizi, S. Baradaran, S. Shahtalebi, S. Khanahmadi, W.J. Basirun. In-vitro bioassay of electrophoretically deposited hydroxyapatite-zirconia nanocomposite coating on Ti-6Al-7Nb implant. Adv. Appl. Ceram. 116 (2017) 293–306. [Google Scholar]
  14. B. Singh, G. Singh, B.S. Sidhu. Investigation of the in vitro corrosion behavior and biocompatibility of niobium (Nb)-reinforced hydroxyapatite (HA) coating on CoCr alloy for medical implants. J. Mater. Res. 34 (2019) 1678–1691. [Google Scholar]
  15. A.S. Hammood. Biomineralization of 2304 duplex stainless steel with surface modification by electrophoretic deposition. J. Appl. Biomater. Funct. Mater. 18 (2020) 2280800019896215. [Google Scholar]
  16. M. Krishani, H. Suhaimi, N.S. Sambudi. A review of hydroxyapatite: Sustainable product development in terms of waste valorization. In: What to Know About Hydroxyapatite. Nova Science Publishers (2023) 219–243. [Google Scholar]
  17. M. Furko, K. Balazsi, C. Balazsi. Calcium phosphate loaded biopolymer composites— A comprehensive review on the most recent progress and promising trends. Coatings 13 (2023) 360. [Google Scholar]
  18. E. Matei, A.A. Saulean, M. Petriceanu, M. Rapa, R.R. Piticescu, R. Stefanoiu, C. Predescu. Environmental sustainability based on zirconium dioxide utilization in non-conventional energy applications. Environments 11 (2024) 265. [Google Scholar]
  19. A. Afzal. Implantable zirconia bioceramics for bone repair and replacement: A chronological review. Mater. Express 4 (2014) 1–12. [Google Scholar]
  20. A.O. Oluwatosin. Surface Morphology Characterisation: Magnetron Sputtering of Nanostructured Titanium Carbide Thin Films on Titanium and its Alloys. Doctoral Dissertation, University of Johannesburg, South Africa (2020). [Google Scholar]
  21. R. Ikram, B.M. Mohamed Jan, M.A. Abdul Qadir, A. Sidek, M.M. Stylianakis, G. Kenanakis. Recent advances in chitin and chitosan/graphene-based bionanocomposites for energetic applications. Polymers 13 (2021) 3266. [Google Scholar]
  22. G. Basmaci. Optimization of machining Nilo 36 superalloy parameters in turning operation. Open Chem. 21 (2023) 20220276. [Google Scholar]
  23. G. ALMisned, E. Rabaa, D. Sen Baykal, E. Ilik, G. Kilic, H.M. Zakaly, H.O. Tekin. The impact of chemical modifications on gamma-ray attenuation properties of some WOs-reinforced tellurite glasses. Open Chem. 21 (2023) 20220297. [Google Scholar]
  24. G. ALMisned, E. Rabaa, D. Sen Baykal, E. Ilik, G. Kilic, H.M. Zakaly, H.O. Tekin. Translocation of tungsten (VI) oxide/gadolinium (III) fluoride in tellurite glasses towards improvement of gamma-ray attenuation features in high-density glass shields. Open Chem. 21 (2023) 20220289 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.