Open Access
| Issue |
EPJ Web Conf.
Volume 370, 2026
International Conference on Advanced Physics: Innovations for a Sustainable Future (IEMPHYS-26)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 14 | |
| DOI | https://doi.org/10.1051/epjconf/202637001006 | |
| Published online | 29 May 2026 | |
- R. Saravanan, R. Anand, C. Boopathi, L. Ganesh Babu, A. Yasminebegum, G. Ravivarman, R. Girimurugan, Mechanical Properties of Polyethylene/Hemp/Lignin Hybridized Composites. International Journal of Vehicle Structures &Systems. 16, 738 (2024). [Google Scholar]
- R. Girimurugan, P. Rajasekaran, Ganesh Babu Loganathan, A. G. Gandhi, Harishchander Anandaram, R. Edwin Josep, Influence of E-Glass Fiber Addition on Mechanical Properties of Jute Fiber Reinforced Hybrid Composites. International Journal of Vehicle Structures &Systems. 16, 723 (2024). [Google Scholar]
- A. Rahman, S. M. A. Nipu, M. S. Alam, S. S. Alam, M. T. Ahmed, A. A. Shantona, M. Moon, Extraction of Cellulosic Compound from Jackfruit Peel Waste and Characterization of PVA Cellulose Composite as Biodegradable Film. Journal of Nanomaterials. 2024, 5052750 (2024). doi: https://doi.org/10.1155/2024/5052750 [Google Scholar]
- B. S. Lazarus, V Leung, R. K. Luu, M. T. Wong, S. Ruiz-Pérez, W. T. Barbosa, W. B. A. Bezerra, J. D. V. Viana Barbosa, M. A. Meyers, Jackfruit: Composition, structure, and progressive collapsibility in the largest fruit on the Earth for impact resistance. Acta Biomaterialia. 166, 430 (2023). doi: https://doi.org/10.1016/j.actbio.2023.04.040 [Google Scholar]
- P. Senthamaraikannan, N. P. Sunesh, D. Divya, S. Sumesh, I. Indran, S. Siengchin, Extraction and characterization of biomass microcrystalline cellulose from Terminalia catappa leaves for food packaging applications. Biomass Conversion and Biorefinery. 15, 17029 (2025). doi: https://doi.org/10.1007/s13399-024-06328-0 [Google Scholar]
- V. P. Suresh Kumar, S. Seenivasan, G. B. Loganathan, P. Jayanthi, R. Girimurugan, S. Hasane Ahammad, Enhancing Mechanical Properties of PLA/Kevlar Fiber Composites with ZrO2 Nanorod Interface Modification for High-Performance Applications. Advances in Science, Technology & Innovation 2024. doi: https://doi.org/10.1007/978-3-031-63909-8_28 [Google Scholar]
- D. K. Singh, R. K. Verma, Production of zirconia modified ultra-high molecular weight polyethylene polymeric bio-nanocomposites: evaluation of wear mechanisms and fracture behavior. Journal of Polymer Engineering. 17, 8301 (2025). 03, 809 https://doi.org/10.15407/nnn.20. [Google Scholar]
- C. Srikanth, G. M. Madhu, S. J. Kashyap, Enhanced structural, thermal, mechanical and electrical properties of nano ZTA/epoxy composites. AIMS Materials Science. 9, 214 (2022). doi: https://doi.org/10.3934/matersci.2022013 [Google Scholar]
- S. S. D. Kumar, R. Resselian, D. A. Dev Anand, Y. Thooyavan, J. S. Joseph Selvi, Optimization of fiber content, length and its effect on overall properties of Licuala grandis leaf stalk fiber/polyester reinforced bio-composites. Journal of Polymer Science. 62, 5265 (2024). doi: https://doi.org/10.1002/pol.20240526 [Google Scholar]
- M. K. Jha, P. P. Das, V. Pandey, P. Gupta, V. Chaudhary, S. Gupta, Water immersion aging of polymer composites: architectural change of reinforcement, mechanical, and morphological analysis. Biomass Conversion and Biorefinery. 14, 15769 (2024). doi: https://doi.org/10.1007/s13399-022-03622-7 [Google Scholar]
- U. Victoria-Martinez, S. Loera-Serna, E. R. Vàzquez-Cerón, Acoustic properties of composite materials based on bentonite and coconut or cactus (nopal) fibers. Journal of Composite Materials. 57, 3173 (2023). doi: https://doi.org/10.1177/00219983231185101 [Google Scholar]
- M. Sriariyanun, P. Paramasivam, S. Venkatesh, K. Rajeshkumar, V. Vijayananth, Manufacturing and mechanical characterization of alkali-treated Borassus fruit natural fiber with cellulose acetate synthetic fiber reinforced polymer composite: selection of optimum configuration using CRITIC-integrated EDAS soft computing techniques. Waste and Biomass Valorization. 27, 880 (2025). doi: https://doi.org/10.1007/s10163-024-02142-y [Google Scholar]
- T. Raja, Y. Yuvarajan, J. U. Udaya Prakash, V. J. Upadhye, L. Singh, S. Kannan, Sustainable innovations: Mechanical and thermal stability in palm fiber-reinforced boron carbide epoxy composites. Results in Engineering. 24, 103214 (2024). doi: https://doi.org/10.1016/j.rineng.2024.103214 [Google Scholar]
- D. Toorchi, E. Tohidlou, H. Khosravi, Enhanced flexural and tribological properties of basalt fiber-epoxy composite using nano-zirconia/graphene oxide hybrid system. Journal of Industrial Textiles. 51, 3238 (2022). doi: https://doi.org/10.1177/1528083720920573 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.