Open Access
| Issue |
EPJ Web Conf.
Volume 371, 2026
9th International Congress on Thermal Sciences (AMT’2026)
|
|
|---|---|---|
| Article Number | 01002 | |
| Number of page(s) | 10 | |
| Section | Heat and Mass Transfer and Fluid Mechanics | |
| DOI | https://doi.org/10.1051/epjconf/202637101002 | |
| Published online | 22 May 2026 | |
- I. El Glili, Y. Foukhari, H. Akkaoui, M. Sammouda, M. Driouich, B. Soufiane, Natural convection enhancement with nano-encapsulated phase change materials in differentially heated square cavities. J Therm Anal Calorim. 150, 22119-22131 (2025). https://doi.org/10.1007/s10973-025-15102-x [Google Scholar]
- V. Botton, R. Boussaa, R. Debacque, L. Hachani, K. Zaidat, H. Ben Hadid, et al, A 2D model for low Prandtl number convection in an enclosure. Int J Therm Sci. 71, 53-60 (2013) . https://doi.org/10.1016/j.ythermalsci.2013.04.017 [Google Scholar]
- Skrzypczak T, E. Węgrzyn-Skrzypczak, J. Winczek. Effect of natural convection on directional solidification of pure metal. Arch Metall Mater. 60, 835-41, (2015) [Google Scholar]
- R. Dyja, E. Gawronska, A. Grosser, P. Jeruszka, N. Sczygiol, Estimate the impact of different heat capacity approximation methods on the numerical results during computer simulation of solidification, in Transactions on Engineering Technologies, WCECS 2015, ed. by S.I. Ao, H. Kim, M. Amouzegar (Springer, Singapore, 2017). https://doi.org/10.1007/978-981-10-2717-8_1 [Google Scholar]
- E.V. Pavlyuk, D.V. Alexandrov, N.V. Kropotin et al., Modeling of directional solidification/melting by the enthalpy-porosity method. Russ. Metall. 1004-1013 (2023). https://doi.org/10.1134/S0036029523080189 [Google Scholar]
- R. Szopa, Numerical modeling of pure metal solidification using the one domain approach. J. Appl. Math. Comput. Mech. 14 (2015) [Google Scholar]
- A. Ebrahimi, C.R. Kleijn, I.M. Richardson, Sensitivity of numerical predictions to the permeability coefficient in simulations of melting and solidification using the enthalpyporosity method. Energies 12, 4360 (2019). https://doi.org/10.3390/en12224360 [Google Scholar]
- I. Hamzaoui, S. Millet, V. Botton, A. Benzaoui, D. Henry, L. Hachani et al., A 2D 1/2 model for natural convection and solidification in a narrow enclosure. Int. J. Therm. Sci. 140, 167-183 (2019). https://doi.org/10.1016/j.ijthermalsci.2019.02.028 [Google Scholar]
- I. Sari, L. Hachani, A. Kharicha, Y. Fautrelle, B. Pichat, K. Zaidat, 3D numerical simulation and experimental investigation of pure tin solidification under natural and forced convection. Int. J. Therm. Sci. 164, 106900 (2021). https://doi.org/10.1016/j.ijthermalsci.2021.106900 [Google Scholar]
- M.H. Avnaim, B. Mikhailovich, A. Azulay, A. Levy, Numerical and experimental study of the traveling magnetic field effect on the horizontal solidification in a rectangular cavity part 2: Acting forces ratio and solidification parameters. Int. J. Heat Fluid Flow 69, 9-22 (2018) [Google Scholar]
- E.V. Rozhitsina, S. Gruner, I. Kaban, W. Hoyer, V.E. Sidorov, P.S. Popel', Dynamic viscosities of pure tin and Sn-Ag, Sn-Cu, and Sn-Ag-Cu eutectic melts. Russ. Metall. 2011, 118-121 (2011) [Google Scholar]
- M. Milgravis, I. Krastins, I. Kaldre, M. Kalvans, A. Bojarevics, T. Beinerts, Pulsed and static magnetic field influence on metallic alloys during solidification. Crystals 13, 259 (2023). https://doi.org/10.3390/cryst13020259 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.