EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 371 (2026) EPJ Web Conf., 371 (2026) 02012 References
Open Access
Issue
EPJ Web Conf.
Volume 371, 2026
9th International Congress on Thermal Sciences (AMT’2026)
Article Number 02012
Number of page(s) 9
Section Materials and Energy Storage Systems
DOI https://doi.org/10.1051/epjconf/202637102012
Published online 22 May 2026
  1. A. Charraou, M. Errebii, A. Mourid, S. Oubenmoh, R. Saadani, M. Rahmoune, M. Rahmoune, M. El Alami, Advanced numerical modeling of the thermal and energy performance of a floor heating system incorporating phase change material. Energy 334, 137505 (2025).https://doi.org/10.1016/j.energy.2025.137505 [Google Scholar]
  2. M. Errebii, F.Z. Laktaoui Amine, Y. El Alami, A. Chaabi, A. Mourid, M. El Alami, Y. Yao, Synergistic enhancement and stabilization of thermoelectric generator (TEG) performance using finned metal foam-PCM composites. Energy 348, 140538 (2026). https://doi.org/10.1016/j.energy.2026.140538 [Google Scholar]
  3. A. Kumar, S. K. Saha, Latent heat thermal storage with variable porosity metal matrix: A numerical study. Renew. Energy 125, 962-973 (2018). https://doi.org/10.1016/j.renene.2018.03.030 [Google Scholar]
  4. V. Soni, A. Kumar, V. K. Jain, Performance evaluation of nano-enhanced phase change materials during discharge stage in waste heat recovery. Renew. Energy 127, 587-601 (2018). https://doi.org/10.1016/j.renene.2018.05.009 [Google Scholar]
  5. M. Hariss, A. Gounni, M. El Alami, Impact of innovative fin design on phase change material melting for thermal energy storage system. Appl. Therm. Eng. 231, 120914 (2023). https://doi.org/10.1016/j.applthermaleng.2023.120914 [Google Scholar]
  6. A. A. Al-Abidi, S. Mat, K. Sopian, M. Y. Sulaiman, A. T. Mohammad, Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins. Int. J. Heat Mass Transf. 61, 684-695 (2013). https://doi.org/10.1016/j.ijheatmasstransfer.2013.02.030 [Google Scholar]
  7. C. Ao, S. Yan, W. Hu, L. Zhao, Y. Wu, Heat transfer analysis of a PCM in shell-and-tube thermal energy storage unit with different V-shaped fin structures. Appl. Therm. Eng. 216, 119079 (2022). https://doi.org/10.1016/j.applthermaleng.2022.119079 [Google Scholar]
  8. A. Sciacovelli, F. Gagliardi, V. Verda, Maximization of performance of a PCM latent heat storage system with innovative fins. Appl. Energy 137, 707-715 (2015). https://doi.org/10.1016/j.apenergy.2014.07.015 [Google Scholar]
  9. A. H. N. Al-Mudhafar, A. F. Nowakowski, F. C. G. A. Nicolleau, Enhancing the thermal performance of PCM in a shell and tube latent heat energy storage system by utilizing innovative fins. Energy Rep. 7, 120-126 (2021). https://doi.org/10.1016/j.egyr.2021.02.034 [Google Scholar]
  10. V. Safari, H. Abolghasemi, B. Kamkari, Experimental and numerical investigations of thermal performance enhancement in a latent heat storage heat exchanger using bifurcated and straight fins. Renew. Energy 174, 102-121 (2021). https://doi.org/10.1016/j.renene.2021.04.076 [Google Scholar]
  11. S. Tang, Y. Song, P. Liu, X. Wu, Y. Xu, J. Zhou, X. Li, Design and optimization of a vertical shell-and-tube latent heat thermal energy storage system via discontinuous fins. Renew. Energy 243, 122568 (2025). https://doi.org/10.1016/j.renene.2025.122568 [Google Scholar]
  12. Niketan, P. Saini, A. Dhar, S. Powar, Parametric optimization and charging performance enhancement of X-fin employed shell and tube solid-solid PCM based latent heat thermal energy storage system. J. Energy Storage 152, 120356 (2026). https://doi.org/10.1016/j.est.2026.120356 [Google Scholar]
  13. C. Zauner, F. Hengstberger, M. Etzel, D. Lager, R. Hofmann, H. Walter, Experimental characterization and simulation of a fin-tube latent heat storage using high density polyethylene as PCM. Appl. Energy 179, 237-246 (2016). https://doi.org/10.1016/j.apenergy.2016.06.138 [Google Scholar]
  14. M. Errebii, A. Mourid, A. Charraou, M. El Alami, M. Kriraa, Performance optimization of a thermoelectric generator using metal foam/phase change material composites and fins. Energy 334, 137806 (2025). https://doi.org/10.1016/j.energy.2025.137806 [Google Scholar]
  15. B. Kamkari, H. Shokouhmand, F. Bruno, Experimental investigation of the effect of inclination angle on convection-driven melting of phase change material in a rectangular enclosure. Int. J. Heat Mass Transf. 72, 186-200 (2014). https://doi.org/10.1016/j.ijheatmasstransfer.2014.01.014 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.