EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 374 (2026) EPJ Web Conf., 374 (2026) 04007 References
Open Access
Issue
EPJ Web Conf.
Volume 374, 2026
1st International Conference on Electronic, Optical Devices and Intelligent Systems (ICEODIS 2026)
Article Number 04007
Number of page(s) 12
Section Materials Science, Nanotechnology and Mechanical Engineering
DOI https://doi.org/10.1051/epjconf/202637404007
Published online 24 June 2026
  1. S. Hezam, Μ. Μ, Μ. Η. El-Sebaie, and Μ. Μ. Megahed, “A review on sheet hydroforming process and its recent developments, “ Journal of Materials Processing Technology, vol. 214, no. 12, pp. 26952712, 2014, doi: https://doi.org/10.1016/j.jmatpiOtec.2014.05.012. [Google Scholar]
  2. Μ. Kleiner, Μ. Geiger, and A. Klaus,"Manufacturing of lightweight components by metal forming, CIRP Annals, vol. 52, no. 2, pp. 521-542, 2003, doi: https://doi.org/10.1016/S0007-8506(07)60203-2. [Google Scholar]
  3. T. Altan and A. E. Tekkaya, “Sheet metal forming: fundamentals, " Journal of Materials Processing Technologyi vol. 98, no. 1, pp. 1-6, 2000, doi: https://doi.org/10.1016/S0924-0136(99)00354-6. [Google Scholar]
  4. Z. Marciniak and K. Kuczynski, “Limit strains in the processes of stretch forming sheet metal, “ International Journal of Mechanical Sciences, vol. 9, no. 9, pp. 609-620, 1967, doi: https://doi.org/10.1016/0020-7403(67)90066-5. [Google Scholar]
  5. S. Keeler and W. Backofen, "Plastic instability and fracture in sheets stretched over rigid punches, “ ASM Transactions Quarterly, vol. 56, pp. 25-48, 1963, doi: https://doi.org/10.1016/S0020-7403(63)80002-0. [Google Scholar]
  6. A. Makinouchi,"Sheet hydroforming technology, Journal of Materials Processing Technology, vol. 60, no. 1-4, pp. 19-26, 1996, doi: https://doi.org/10.1016/0924-0136(96)02339-8. [Google Scholar]
  7. J. Lin and T. A. Dean, "Modelling of ductile fracture in hot forming processes, “ International Journal of Plasticity, vol. 21, no. 11, pp. 2205-2234, 2005, doi: https://doi.org/10.1016/j.ijplas.2004.12.004. [Google Scholar]
  8. H. Takuda, K. Mori, N. Hatta, T. Abe, and Y. Matsuo, "Finite-element simulation of sheet hydroforming, Journal of Materials Processing Technology, vol. 71, no. 1, pp. 19-26, 1997, doi: https://doi.org/10.1016/S0924-0136(97)00150-4. [Google Scholar]
  9. Μ. Koç and T. Altan, "An overall review of the tube hydroforming (THF) technology, Journal of Materials Processing Technology vol. 108, no. 3, pp. 384-393, 2001, doi: https://doi.org/10.1016/S0924-0136(00)00868-7. [Google Scholar]
  10. A. H. van den Boogaard and J. Huétink, “Modeling of sheet forming processes, “ International Journal of Plasticity, vol. 22, no. 10, pp. 1883-1909, 2006, doi: https://doi.org/10.1016/j.ijplas.2005.09.006. [Google Scholar]
  11. Μ. Stoughton and J. Yoon, “Review of constitutive modeling of sheet metals International Journal of Plasticity vol. 20, no. 4-5, pp. 705-731, 2004, doi: https://doi.org/10.1016/j.ijplas.2003.06.002. [Google Scholar]
  12. H. P. Stiiwe and H. J. McQueen, “Work hardening and recovery in low carbon steels Acta Metallurgica, vol. 21, no. 4, pp. 385-398, 1973, doi: https://doi.org/10.1016/0001-6160(73)90133-0 [Google Scholar]
  13. K. Siegert and T. Müller, Recent developments in hydroCrming, "CIRP Annals, vol. 49, no. 2, pp. 575-590, 2000, doi: https://doi.org/10.1016/S0007-8506(07)63419-3. [Google Scholar]
  14. J. Cao and Μ. Boyce, "Modeling of sheet metal forming under biaxial stretching, “ International Journal of Mechanical Sciences, vol. 40, no. 2-3, pp. 199-214, 1998, doi: https://doi.org/10.1016/S0020-7403(97)00061-4. [Google Scholar]
  15. Y. H. Moon and S. Y. Lee,"Formability evaluation using hydraulic bulge test, “ Journal of Materials Processing Technology vol. 130-131, pp. 914, 2002, doi: https://doi.org/10.1016/S0924-0136(02)00732-1. [Google Scholar]
  16. S. Chinchanikar, H. Mulik, P. Varude, S. Atole, and N. Mundada, “A review of emerging hydroforming technologies: design considerations, parametric studies, and recent innovations, Journal of Engineering and Applied Science, vol. 71, no. 1, Oct. 2024, doi: https://doi.org/10.1186/s44147-024-00546-z. [Google Scholar]
  17. F. Khorasani, R. Jamaati, and H. J. Aval, "Extraordinary toughness in AISI 1008 steel via controlling intercritical annealing time, Journal of Manufacturing Processes, vol. 95, pp. 131-142, Jun. 2023, doi: https://doi.org/10.1016jjmpro.2023.04.016. [Google Scholar]
  18. A. G. Nath et al., “Design and Manufocture of Miniature Hydraulic Gear Pump for Bio-Medical Application, Materials Today: Proceedingsi vol. 5, no. 11, pp. 25570-25580, 2018, doi: https://doi.org/10.1016zj.matpr.2018.10.364. [Google Scholar]
  19. R. Μ. De Araujo Bomancin, C. P. Nikhare, and P. V. P. Marcondes, "Numerical comparison of advanced high strength steels forming limit curve using Banabic and Nakazima tests, “ International Journal on Interactive Design and Manufacturing (IJIDeM), vol. 18, no. 9, pp. 6469-6478, Feb. 2023, doi: https://doi.org/10.1007/s12008-023-01218-7. [Google Scholar]
  20. D. Tabor, “The hardness of metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 192, no. 1029, pp. 247-274, 1948. doi: https://doi.org/10.1098/rspa.1948.0021. [Google Scholar]
  21. A. A. El-Danaf M. Μ. Megahed, and Μ. Μ. ElSebaie, “The influence of strain hardening on the hardness and microstructure of low carbon steels, “ Materials Science and Engineering A, vol. 528, no. 3, pp. 1525-1533, 2011. doi: https://doi.org/10.1016/j.msea.2010.10.063. [Google Scholar]
  22. M. Rasheed, I. Alshalal, A.A. Ashed, M.A. Sarhan, A.S. Jaber, Indones. J. Electr. Eng. Comput. Sci. 33 (2024) 653-660. doi: https://doi.org/10.11591/ijeecs.v33.i1.pp653-660 [Google Scholar]
  23. M. Darraji, L. Saqban, T. Mutar, M. Rasheed, A. Hussein, J. Adv. Biotechnol. Exp. Ther. 6 (2022) 687. doi: https://doi.org/10.5455/jabet.2022.d147 [Google Scholar]
  24. M. Rasheed, et al., J. Adv. Biotechnol. Exp. Ther. 6 (2023) 495. doi: https://doi.org/10.5455/jabet.2023.d144 [Google Scholar]
  25. M. Al-Darraji, S. Jasim, O. Salah Aldeen, A. Ghasemian, M. Rasheed, Asian Pac. J. Cancer Prev. 23 (2022) 3437-3442. doi: https://doi.org/10.31557/apjcp.2022.23.10.3437 [Google Scholar]
  26. R. Jalal, S. Shihab, M.A. Alhadi, M. Rasheed, J. Phys.: Conf. Ser. 1660 (2020) 012090. doi: https://doi.org/10.1088/1742-6596/1660/1/012090 [Google Scholar]
  27. H.K. Aity, E. Dhahri, M. Rasheed, Ceram. Int. 50(24) Part B (2024) 54666-54687. doi: https://doi.org/10.1016/j.ceramint.2024.10.324 [Google Scholar]
  28. T. Rashid, M.M. Mokji, M. Rasheed, 54 J. Opt. (2024) 3671-3683. doi: https://doi.org/10.1007/s12596-024-02080-w [Google Scholar]
  29. T. Saidani, M. Rasheed, I. Alshalal, A.A. Rashed, M.A. Sarhan, R. Barillé, Res. Eng. Struct. Mater. 10(2) (2023) 743-770. doi: https://doi.org/10.17515/resm2023.21ma0922rs [Google Scholar]
  30. F. Boudou, A. Guendouzi, A. Belkredar, M. Rasheed, Not. Sci. Biol. 16(2) (2024) 13837. doi: https://doi.org/10.55779/nsb16211837 [Google Scholar]
  31. S. Shihab, M. Rasheed, O. Alabdali, A.A. Abdulrahman, J. Phys.: Conf. Ser. 1879 (2021) 022120. doi: https://doi.org/10.1088/1742-6596/1879/2/022120 [Google Scholar]
  32. A.J. Hussein, M.N. Al-Darraji, M. Rasheed, M.A. Sarhan, IOP Conf . Ser.: Earth Environ. Sci. 1262 (2023) 022005. doi: https://doi.org/10.1088/1755-1315/1262/2/022005 [Google Scholar]
  33. A.J. Hussein, M.N. Al-Darraji, M. Rasheed, IOP Conf. Ser.: Earth Environ. Sci. 1262(2) (2023) 022007. doi: https://doi.org/10.1088/1755-1315/1262/2/022007 [Google Scholar]
  34. M. Sellam, M. Rasheed, S. Azizi, T. Saidani, Ceram. Int. 50(12) (2024) 20917-20935. doi: https://doi.org/10.1016/j.ceramint.2024.03.094 [Google Scholar]
  35. M. Rasheed, M.N. Al-Darraji, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1963(1) (2021) 012058. doi: https://doi.org/10.1088/1742-6596/1963/1/012058 [Google Scholar]
  36. M. Rasheed, M.N. Al-Darraji, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1963(1) (2021) 012059. doi: https://doi.org/10.1088/1742-6596/1963/1/012059 [Google Scholar]
  37. M. Rasheed, S. Shihab, O. Alabdali, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1999 (2021) 012077. doi: https://doi.org/10.1088/1742-6596/1999/1/012077 [Google Scholar]
  38. M. Rasheed, O. Alabdali, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1999(1) (2021) 012078. doi: https://doi.org/10.1088/1742-6596/1999/1/012078 [Google Scholar]
  39. O. Alabdali, S. Shihab, M. Rasheed, T. Rashid, AIP Conf. Proc. 2386(1) (2022) 050019. doi: https://doi.org/10.1063/5.0066860 [Google Scholar]
  40. N. Assoudi, et al., Opt. Quantum Electron. 54(9) (2022) 3927. doi: https://doi.org/10.1007/s11082-022-03927-x [Google Scholar]
  41. A.H. Ali, A.S. Jaber, M.T. Yaseen, M. Rasheed, O. Bazighifan, T.A. Nofal, Complexity 2023 9367638 (2022) 1-9. doi: https://doi.org/10.1155/2023/9852348 [Google Scholar]
  42. D. Bouras, M. Fellah, R. Barille, M.A. Samad, M. Rasheed, M.A. Alreshidi, Opt. Quantum Electron. 56(104) (2023) 5778. doi: https://doi.org/10.1007/s11082-023-05778-6 [Google Scholar]
  43. I. Alshalal, H.M.I. Al-Zuhairi, A.A. Abtan, M. Rasheed, M.K. Asmail, J. Mech. Behav. Mater. 32(1) (2023). doi: https://doi.org/10.1515/jmbm-2022-0280 [Google Scholar]
  44. E. Kadri, K. Dhahri, R. Barillé, M. Rasheed, Phase Transit. 94(2) (2021) 65-76. doi: https://doi.org/10.1080/01411594.2020.1832224. [Google Scholar]
  45. A. Keziz, M. Heraiz, F. Sahnoune, M. Rasheed, Ceram. Int. 49(20) (2023) 32989-33003. doi: https://doi.Org/10.1016/j.ceramint.2023.07.275. [Google Scholar]
  46. M. Rasheed, et al., J. Phys.: Conf. Ser. 1999(1) (2021) 012080. doi: https://doi.org/10.1088/1742-6596/1999/1/012080 [Google Scholar]
  47. M. Enneffatia, M. Rasheed, B. Louatia, K. Guidaraa, S. Shihab, R. Barillé, J. Phys.: Conf. Ser. 1795(1) (2021) 012050. doi: https://doi.org/10.1088/1742-6596/1795/1/012050 [Google Scholar]
  48. M. Rasheed, O.Y. Mohammed, S. Shihab, A. Al-Adili, J. Phys.: Conf. Ser. 1795(1) (2021) 012043. doi: https://doi.org/10.1088/1742-6596/1795/1/012043 [Google Scholar]
  49. S. Shihab, M. Rasheed, O. Alabdali, A.A. Abdulrahman, J. Phys.: Conf. Ser. 1879(2) (2021) 022120. doi: https://doi.org/10.1088/1742-6596/1879/2/022120 [Google Scholar]
  50. A. Zubaidi, L.M. Asaad, I. Alshalal, M. Rasheed, J. Mech. Behav. Mater. 32(1) (2023). doi: https://doi.org/10.1515/jmbm-2022-0302. [Google Scholar]
  51. M. Ismael, T. Rashid, M.A. Sarhan, M. Rasheed, I.M. Sala, Eureka Phys. Eng. 4 (2023) 29-39. doi: https://doi.org/10.21303/2461-4262.2023.002770 [Google Scholar]
  52. H. K. Aity, E. Dhahri, M. Rasheed, Ceram. Int. (2024). doi: https://doi.org/10.1016/j.ceramint.2024.10.324 [Google Scholar]
  53. M. Mohammed, M. Rasheed, AIP Conf. Proc. 3321 (2025) 020026. doi: https://doi.org/10.1063/5.0289719 [Google Scholar]
  54. Boudou, A. Belkredar, A. Berkane, M. Rasheed, Not. Sci. Biol. 17(2) (2025) 12183. doi: https://doi.org/10.55779/nsb17212183. [Google Scholar]
  55. Boudou, et al., Not. Sci. Biol. 17(3) (2025) 12593. doi: https://doi.org/10.55779/nsb17312593. [Google Scholar]
  56. R.S. Mahmood, et al., J. Mech. Behav. Mater. 34 (2025). doi: https://doi.org/10.1515/jmbm-2025-0040 [Google Scholar]
  57. T. Rashid, M.M. Mokji, M. Rasheed, J. Mech. Behav. Mater. 34 (2025). doi: https://doi.org/10.1515/jmbm-2025-0074 [Google Scholar]
  58. M. Rasheed, M.N. Mohammedali, F.A. Sadiq, M.A. Sarhan, T. Saidani, J. Opt. 54 (2024) 3490-3504. doi: https://doi.org/10.1007/s12596-024-01928-5 [Google Scholar]
  59. A. A. Ali, M. Rasheed, Effect of changing magnetite percentage on structural and magnetic properties of cobalt ferrite prepared by the sol-gel method, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 277-287. doi: https://doi.org/10.56053/10.s.277. [Google Scholar]
  60. Khaleefah, M. RASHEED, Sol-gel-derived mullite nanoparticles: Structural and antibacterial insights, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 289-300. doi: https://doi.org/10.56053/10.s.289. [Google Scholar]
  61. Z. S. Ahmed, M. Rasheed, H. S. Ahmed, Optimizing NiO nanoparticle properties for antibacterial applications via temperature-driven structural modification, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 329-342. doi: https://doi.org/10.56053/10.s.329. [Google Scholar]
  62. Z. S. Ahmed, M. Rasheed, H. S. Ahmed, Enhancing a-BizO3 nanoparticle crystallinity and antibacterial functionality through controlled calcination, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 343-356. doi: https://doi.org/10.56053/10.s.343. [Google Scholar]
  63. A. I. A. Ali, M. Rasheed, Effect of sintering temperature on electrical and structural properties for spinel ferrites prepared by sol-gel method, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 239-256. doi: https://doi.org/10.56053/10.s.239 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.