Open Access
| Issue |
EPJ Web Conf.
Volume 376, 2026
6th International Conference on Recent Advances in Mechanical Engineering and Nanomaterials (ICRAMEN 2026)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 13 | |
| Section | Solid Mechanics and Modeling | |
| DOI | https://doi.org/10.1051/epjconf/202637603001 | |
| Published online | 01 July 2026 | |
- FIA Technical Regulations, Formula One Technical Regulations 2018 (Fédération Internationale de l’Automobile, Geneva, 2018) [Google Scholar]
- S. Srinivasan, H.O. Demirel, Quantifying vision obstruction of Formula One (F1) halo concept variants, in Proceedings of the 7th International Digital Human Modeling Symposium, University of Iowa 7(1) (2022) [Google Scholar]
- S.M. Rosalie, J.M. Malone, Women in motorsport: A case report of driving posture and performance after double mastectomy. Phys. Ther. Sport 36, 1–4 (2019) [Google Scholar]
- H.O. Demirel, S. Srinivasan, A proactive ergonomics framework to assess A-pillar vision obstruction. Digit. Hum. Model. Appl. Health Saf Ergon. Risk Manag. 46, 16 (2022) [Google Scholar]
- M. Lin, P. Papadopoulos, Effect of halo protection device on the aerodynamic performance of formula racecar. Int. J. Mech. Mechatron. Eng. 14(1), 13–18 (2014) [Google Scholar]
- A. Dhumal, N. Ambhore, P. Tamkhade, A. Marne, N. Mujawar, Numerical optimization for aerodynamic performance of nose cone of FSAE vehicle through CFD. CFD Lett. 16, 161–171 (2024) [Google Scholar]
- M.M. Ghisheer, I. Esen, H. Ahlatci, B. Akin, Investigation of microstructure, mechanics, and corrosion properties of Ti6Al4V alloy in different solutions. Coatings 14(3), 277 (2024) [Google Scholar]
- A. Szafranska, A. Antolak-Dudka, P. Baranowski, P. Bogusz, D. Zasada, J. Malachowski, T. Czujko, Identification of mechanical properties for titanium alloy Ti- 6Al-4V produced using LENS technology. Materials 12(6), 886 (2019) [Google Scholar]
- M.A. Kumbhalkar, T.S. Sargar, S.H. Sarje, M. Sakhlecha, S. Prayagi, G. Gondhlekar, N.B. Kardekar, M. Sorte, Finite element analysis of paddler sludge dryer for its structural integrity under different loading conditions. Int. J. Basic Appl. Sci. 14(SI-2), 26–40 (2025). https://doi.org/10.14419/ddg57682 [Google Scholar]
- U. Ravelli, Aerodynamics of a 2017 Formula 1 car: Numerical analysis of a baseline vehicle and design improvements in freestream and wake flows, Master Thesis, Università degli Studi di Bergamo, Italy (2019) [Google Scholar]
- K. Rangarajan, G. Velayudhan, Enhancing aerodynamic performance of a formula car through modification and evaluation, in Proceedings of the International Conference on Trends in Automotive Parts Systems and Applications (2024), 354–537 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.