Dynamic impact response of high-density square honeycombs made of TRIP steel and TRIP matrix composite material

¹ Institute of Materials Engineering, Technische Universität Bergakademie Freiberg, 09599 Freiberg, Germany
² Institute of Materials Science, Technische Universität Bergakademie Freiberg, 09599 Freiberg, Germany
³ Institute of Ceramic, Glass and Construction Materials, Technische Universität Bergakademie Freiberg, 09599 Freiberg, Germany

Abstract

Two designs of square-celled metallic honeycomb structures fabricated by a modified extrusion technology based on a powder feedstock were investigated. The strength and ductility of these cellular materials are achieved by an austenitic CrNi (AISI 304) steel matrix particle reinforced by an MgO partially-stabilized zirconia building up their cell wall microstructure. Similar to the mechanical behaviour of the bulk materials, the strengthening mechanism and the martensitic phase transformations in the cell walls are affected by the deformation temperature and the nominal strain rate. The microstructure evolution during quasi-static and dynamic impact compression up to high strain rates of 10³ 1/s influences the buckling and failure behaviour of the honeycomb structures. In contrast to bending-dominated quasi-isotropic networks like open-celled metal foams, axial compressive loading to the honeycomb’s channels causes membrane stretching as well as crushing of the vertical cell node elements and cell walls. The presented honeycomb materials differ geometrically in their cell wall thickness-to-cell size-ratio. Therefore, the failure behaviour is predominantly controlled by global buckling and torsional-flexural buckling, respectively, accompanied by plastic matrix flow and strengthening of the cell wall microstructure.