Numerical and experimental modelling of the centrifugal compressor stage – setting the model of impellers with 2D blades
EPJ Web Conf., 143 (2017) 02073
Published online: 2017-05-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Selecting the Centrifugal Compressor Impeller Blade Height During Preliminary Designing
O.A. Solovyeva, Y.B. Galerkin, A.A. Drozdov, et al.Proceedings of Higher Educational Institutions. Маchine Building (3 (744)) 76 (2022)
https://doi.org/10.18698/0536-1044-2022-3-76-95
Numerical modelling and experimental investigation of the influence of selected geometric elements on the working characteristics of radial compressor stages with prismatic blades
Richard Matas, Tomáš Syka, Lukáš Hurda, et al.EPJ Web of Conferences 269 01036 (2022)
https://doi.org/10.1051/epjconf/202226901036
2337 060006 (2021)
https://doi.org/10.1063/5.0041454
2412 030021 (2021)
https://doi.org/10.1063/5.0075001
CFD-model of Vaneless Diffuser of Centrifugal Compressor
О.А. Solovyeva, А.А. Drozdov, E.Yu. Popova and K.V. SoldatovaHerald of the Bauman Moscow State Technical University. Series Mechanical Engineering (2 (137)) 109 (2021)
https://doi.org/10.18698/0236-3941-2021-2-109-130
Numerical simulation and optimization of centrifugal compressor return channels: methods and results
Y.B. Galerkin, L.N. Marenina, A.A. Drozdov, O.A. Solovyeva and K.V. SoldatovaIOP Conference Series: Materials Science and Engineering 1180 (1) 012026 (2021)
https://doi.org/10.1088/1757-899X/1180/1/012026
2412 030011 (2021)
https://doi.org/10.1063/5.0076213
The Problem of Accounting for Heat Exchange between the Flow and the Flow Part Surfaces When Modeling a Viscous Flow in Low-Flow Stages of a Centrifugal Compressor
Sergey Kartashov, Yuri Kozhukhov, Vycheslav Ivanov, Aleksei Danilishin, Aleksey Yablokov, Aleksey Aksenov, Ivan Yanin and Minh Hai NguyenApplied Sciences 10 (24) 9138 (2020)
https://doi.org/10.3390/app10249138
Analysis of the influence of theoretical head coefficient on the low-flow centrifugal compressor stage characteristics
A Yablokov, Y Kozhukhov, N Sadovskiy, I Yanin and M H NguyenIOP Conference Series: Materials Science and Engineering 1001 (1) 012045 (2020)
https://doi.org/10.1088/1757-899X/1001/1/012045
Numerical study of the equivalent roughness effect on the low-flow centrifugal compressor impeller characteristics
A Yablokov, Y Kozhukhov, N Sadovskiy, A Danilishin and M H NguyenIOP Conference Series: Materials Science and Engineering 1001 (1) 012009 (2020)
https://doi.org/10.1088/1757-899X/1001/1/012009
Design, Plant Test and CFD Calculation of a Turbocharger for a Low-Speed Engine
Aleksey Borovkov, Igor Voinov, Yuri Galerkin, Roman Kaminsky, Aleksandr Drozdov, Olga Solovyeva and Kristina SoldatovaApplied Sciences 10 (23) 8344 (2020)
https://doi.org/10.3390/app10238344
Issues of gas dynamic characteristics modeling: a study on a centrifugal compressor model stage
Aleksey Borovkov, Igor Voinov, Yuri Galerkin, et al.E3S Web of Conferences 140 06003 (2019)
https://doi.org/10.1051/e3sconf/201914006003
2151 030032 (2019)
https://doi.org/10.1063/1.5122082
2151 030051 (2019)
https://doi.org/10.1063/1.5122101
2151 030018 (2019)
https://doi.org/10.1063/1.5122068
2151 030017 (2019)
https://doi.org/10.1063/1.5122067
Experimental investigation and numerical modelling of 3D radial compressor stage and influence of the technological holes on the working characteristics
Richard Matas, Tomáš Syka, Lukáš Hurda and P. DančováEPJ Web of Conferences 180 02060 (2018)
https://doi.org/10.1051/epjconf/201818002060