Mechanical properties at high strain-rate of lead core and brass jacket of a NATO 7.62 mm ball bullet
EPJ Web of Conferences, 26 (2012) 01060
Published online: 2012-08-31
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A New Cutting Mechanics Model for Improved Shear Angle Prediction in Orthogonal Cutting Process
Farshad Kazemi, Chunlei Song, Adam T. Clare and Xiaoliang JinJournal of Manufacturing Science and Engineering 147 (4) (2025)
https://doi.org/10.1115/1.4066976
Impact Resistance of Layered Aramid Fabric: A Numerical Study on Projectile-Induced Damage
Larisa Titire, Cristian Muntenita and Mariana ChivuPolymers 16 (24) 3522 (2024)
https://doi.org/10.3390/polym16243522
On the effect of pitch and yaw angles in oblique impacts of small-caliber projectiles
Teresa FrasDefence Technology 31 73 (2024)
https://doi.org/10.1016/j.dt.2023.06.004
Ballistic resistance analysis of hard ceramic combined with aluminum foam sandwich constructions
Arief Nur Pratomo, Zaka Ruhma, Wawan Rukmono, Martijanti Martijanti, Sutarno Sutarno and Kwong Ming TseInternational Journal of Protective Structures (2024)
https://doi.org/10.1177/20414196241245126
Experimental and numerical investigation on the ricochet of hard-core 7.62 small-calibre projectiles from the SiC and Al2O3 ceramic targets
Teresa Fras, Anthony Bracq, Marina Seidl and Gregory VincentInternational Journal of Impact Engineering 192 105010 (2024)
https://doi.org/10.1016/j.ijimpeng.2024.105010
Ballistic performance of monolithic rubber-ceramic composite armor
Jitarasu Octavian and Lache SimonaJournal of Composite Materials 58 (5) 689 (2024)
https://doi.org/10.1177/00219983231226412
Simulation of an Impact on an Aramid Fabric Panel by A .357 Projectile
Larisa Chiper Titire, George Ghiocel Ojoc, Christian Popescu and Lorena DeleanuInternational conference KNOWLEDGE-BASED ORGANIZATION 29 (3) 1 (2023)
https://doi.org/10.2478/kbo-2023-0068
Building a predictive soft armor finite element model combining experiments, simulations, and machine learning
Tanu Pittie, Kartikeya Kartikeya, Naresh Bhatnagar, NM Anoop Krishnan, Thilak Senthil and Subramaniam D RajanJournal of Composite Materials 57 (9) 1599 (2023)
https://doi.org/10.1177/00219983231160497
Soda Lime Glass Response to Projectile Impact and Damage Characterization Using Depth of Penetration Testing with a Polycarbonate Backing and Comparison to Finite Element Model
D. Singh, P. Sathananthan, A. Sirois and D. S. CroninJournal of Dynamic Behavior of Materials 8 (2) 285 (2022)
https://doi.org/10.1007/s40870-022-00335-w
Computational ballistic analysis of the cranial shot to John F. Kennedy
C. Then, K. Nelson, T.J. Vogl and K.E. RothForensic Science International 334 111264 (2022)
https://doi.org/10.1016/j.forsciint.2022.111264
Simulation of the Behavior of 32-Layer Composite Plate for Ballistic Protection
George Ghiocel OJOC, Larisa CHIPER TITIRE, Lorena DELEANU, Cristian MUNTENITA and Catalin PIRVUINCAS BULLETIN 14 (4) 95 (2022)
https://doi.org/10.13111/2066-8201.2022.14.4.8
Dynamic testing and simulation of 9 mm full metal jacket ammunition
Yann Coget, Josip Novak, Georg Gütter, Yaël Demarty, Alexis Rusinek, F. Gálvez Díaz-Rubio and D.A. Cendón FrancoEPJ Web of Conferences 250 05002 (2021)
https://doi.org/10.1051/epjconf/202125005002
Characterization and modelling of the mechanical behaviour of metal rings: Application to a brass bullet jacket
A. Bracq, J-S. Brest, J. Abrantes de Sampaio, F. Moitrier and Y. DemartyForces in Mechanics 4 100030 (2021)
https://doi.org/10.1016/j.finmec.2021.100030
Analysis of high velocity bullet proof composite material
Chirag Goyal, A.V.S.C. Anudeep and R. SarweswaranMaterials Today: Proceedings 33 4533 (2020)
https://doi.org/10.1016/j.matpr.2020.08.055
Characterization of the Mechanical Behavior of a Lead Alloy, from Quasi-Static to Dynamic Loading for a Wide Range of Temperatures
Yann Coget, Yaël Demarty and Alexis RusinekMaterials 13 (10) 2357 (2020)
https://doi.org/10.3390/ma13102357
Deformation of Stacked Metallic Sheets by Shock Wave Loading
Sandeep P. Patil, Rahul Murkute, Nima Shirafkan and Bernd MarkertMetals 8 (9) 679 (2018)
https://doi.org/10.3390/met8090679
Strain rate sensitivity assessment of metallic materials by mechanical indentation tests
M.A.G. Calle, L.M. Mazzariol and M. AlvesMaterials Science and Engineering: A 725 274 (2018)
https://doi.org/10.1016/j.msea.2018.04.023
Ballistic performance of composite metal foams
Matias Garcia-Avila, Marc Portanova and Afsaneh RabieiComposite Structures 125 202 (2015)
https://doi.org/10.1016/j.compstruct.2015.01.031
Predicting ballistic impact failure of aluminium 6061-T6 with the rate-independent Bao-Wierzbicki fracture model
A. Gilioli, A. Manes, M. Giglio and T. WierzbickiInternational Journal of Impact Engineering (2014)
https://doi.org/10.1016/j.ijimpeng.2014.10.004
Ballistic Performance of a Composite Metal Foam-ceramic Armor System
Matias Garcia-Avila, Marc Portanova and Afsaneh RabieiProcedia Materials Science 4 151 (2014)
https://doi.org/10.1016/j.mspro.2014.07.571
Ballistic Performance of Multi-layered Fabric Composite Plates Impacted by Different 7.62mm Calibre Projectiles
A. Manes, L.M. Bresciani and M. GiglioProcedia Engineering 88 208 (2014)
https://doi.org/10.1016/j.proeng.2014.11.146
Investigation about the influence of the mechanical properties of lead core and brass jacket of a NATO 7.62 mm ball bullet in numerical simulations of ballistic impacts
M. Giglio, A. Gilioli, A. Manes, L. Peroni and M. ScapinEPJ Web of Conferences 26 04010 (2012)
https://doi.org/10.1051/epjconf/20122604010