Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Parametric evaluations of geometrical discrepancies in single point incremental bending

Arshpreet Singh
International Journal on Interactive Design and Manufacturing (IJIDeM) (2024)
https://doi.org/10.1007/s12008-024-01951-7

Physics-informed neural network for velocity prediction in electromagnetic launching manufacturing

Hao Sun, Yuxuan Liao, Hao Jiang, Guangyao Li and Junjia Cui
Mechanical Systems and Signal Processing 220 111671 (2024)
https://doi.org/10.1016/j.ymssp.2024.111671

Novel multi-layer field shaper in electromagnetic manufacturing process technology of tube joining for uniform deformation

Hao Sun, Weidong Du, Wanting You, Li Yang, Hao Jiang, Junjia Cui, Guangyao Li and Da Cai
Journal of Manufacturing Processes 127 709 (2024)
https://doi.org/10.1016/j.jmapro.2024.08.020

Design and optimization of bio-inspired thin-walled structures for energy absorption applications

Pezhman Negahdar Panirani and Jaafar Ghanbari
International Journal of Crashworthiness 28 (1) 1 (2023)
https://doi.org/10.1080/13588265.2022.2038944

Single point incremental bending: Bending load evaluations and process validation

Arshpreet Singh and Anupam Agrawal
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 237 (1-2) 305 (2023)
https://doi.org/10.1177/09544054221100316

Effect of the Tool Pin Eccentricity and Cooling Rate on Microstructure, Mechanical Properties, Fretting Wear, and Corrosion Behavior of Friction Stir Processed AA6063 Alloy

Mahesh Patel and Jayaprakash Murugesan
Journal of Materials Engineering and Performance 31 (10) 8554 (2022)
https://doi.org/10.1007/s11665-022-06860-y

The Influence of Co Addition on the Structure and Mechanical Properties of Tungsten Heavy Alloys

Paweł Skoczylas and Mieczysław Kaczorowski
Materials 15 (24) 9064 (2022)
https://doi.org/10.3390/ma15249064

Preliminary Study of the Rhenium Addition on the Structure and Mechanical Properties of Tungsten Heavy Alloy

Paweł Skoczylas and Mieczysław Kaczorowski
Materials 14 (23) 7365 (2021)
https://doi.org/10.3390/ma14237365

Next Generation Materials and Processing Technologies

Manish Kumar Gupta
Springer Proceedings in Materials, Next Generation Materials and Processing Technologies 9 419 (2021)
https://doi.org/10.1007/978-981-16-0182-8_32

Microstructure and Properties of Tungsten Heavy Alloy Connections Formed during Sintering with the Participation of the Liquid Phase

Paweł Skoczylas, Zbigniew Gulbinowicz and Olgierd Goroch
Materials 13 (21) 4965 (2020)
https://doi.org/10.3390/ma13214965

Soft Target Protection

Matúš Ivančo, Lucia Figuli and Chiara Bedon
NATO Science for Peace and Security Series C: Environmental Security, Soft Target Protection 169 (2020)
https://doi.org/10.1007/978-94-024-1755-5_14

ARAÇLARDA KULLANILAN EMNİYET KEMERLERİNİN KAZA ANINDA İNSAN SAĞLIĞINA OLAN OLUMSUZ ETKİLERİNİN AZALTILMASI İÇİN BİR SİSTEM GELİŞTİRİLMESİ

Reşat Oğuzhan SÜMER, Betül GÜLÇİMEN ÇAKAN, Mustafa Cemal ÇAKIR and Agah UĞUZ
Uludağ University Journal of The Faculty of Engineering 183 (2019)
https://doi.org/10.17482/uumfd.578592

Farklı oranlarda alüminyum köpük takviyeli çarpışma-kutularının mekanik performanslarının karşılaştırılması

Betül GÜLÇİMEN ÇAKAN, Cihat ENSARİOĞLU and M. Cemal ÇAKIR
Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi 21 (1) 295 (2019)
https://doi.org/10.25092/baunfbed.547179

Investigation of Parametric Effects on Geometrical Inaccuracies in Deformation Machining Process

Arshpreet Singh and Anupam Agrawal
Journal of Manufacturing Science and Engineering 140 (7) 074501 (2018)
https://doi.org/10.1115/1.4039586

Determining Al6063 constitutive model for cutting simulation by inverse identification method

Xiaolei Chen, Xibin Wang, Lijing Xie, Tao Wang and Bin Ma
The International Journal of Advanced Manufacturing Technology 98 (1-4) 47 (2018)
https://doi.org/10.1007/s00170-017-0299-9