Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation

University of Padova, Department of Mechanical Engineering, 35131 Padova, Italy

Abstract

In this paper the fatigue behaviour of a stainless steel AISI 304L is analysed. In the first part of the work the results obtained under constant amplitude fatigue are presented and synthesised in terms of both stress amplitude and energy released to the surroundings as heat by a unit volume of material per cycle, Q. Then some specimens have been fatigued in variable amplitude, two different load level tests: the first level was set higher while the second was lower than the constant amplitude fatigue limit. The Q values, evaluated during the second part of the fatigue test, have been compared with those calculated under constant amplitude fatigue at the same load level. The comparison allowed us to notice that the Q parameter is sensitive to the fatigue damage accumulated by the material during the first part of the fatigue test.