Issue |
EPJ Web of Conferences
Volume 32, 2012
EC-17 – 17th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating
|
|
---|---|---|
Article Number | 04011 | |
Number of page(s) | 7 | |
Section | Technology session | |
DOI | https://doi.org/10.1051/epjconf/20123204011 | |
Published online | 06 September 2012 |
https://doi.org/10.1051/epjconf/20123204011
3.6MW Power Supply System of the 170GHz ECH&CD System in KSTAR
1 Dawonsys company, Jeongwang-dong 1277-4, Siheung-si, Gyeonggi-do 429-850, Korea
2 National Fusion Research Institute, Gwahangno 113, Yuseong-gu, Daejeon 305-333, Korea
A 3.6 MW (-66 kV/55 A) Gyrotron power supply system was developed for the 170 GHz ECH&CD gyrotron system in KSTAR. This power supply system consists of Cathode Power Supply(CPS), Anode Power Supply(APS) and Body Power Supply(BPS). The CPS is using the Pulse Step Modulation by the 32set of IGBT choppers. The respons time of Chopper is very fast. So the cathode voltaget is able to be controlled rapidly. The APS is a sort of voltage devider using zener and switch component. It was achieved 3kHz modulation operation. The BPS is combined the commercial power supply and special high voltage switches. It is very simple topology but 5kHz modulation was accomplished easily. Theses power supply system were installed and commissioned successfully in 2011. This paper presents the topology of the each power supply and test result for 170 GHz gyrotron in KSTAR.
© Owned by the authors, published by EDP Sciences 2012
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.