EPJ Web of Conferences
Volume 87, 2015EC18 - 18th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating
|Number of page(s)||5|
|Section||ECRH and ECCD|
|Published online||12 March 2015|
Real-Time Feed-backed Anode Power Supply for 170GHz gyrotron in KSTAR
1 Dawonsys company, 227, Gyeonggihwagidae-ro, Siheung-si, Gyeonggi-do 429-850, Korea
2 National Fusion Research Institute, Gwahangno 113, Yuseong-gu, Daejeon 305-333, Korea
a Corresponding author: firstname.lastname@example.org
Published online: 12 March 2015
3.6 MW (66 kV/55 A) high voltage power supply system was developed for the 170 GHz ECH&CD system in KSTAR. It consists of the cathode power supply (CPS), anode power supply (APS), and body power supply (BPS). Currently, modulation frequency of APS was limited to less than 1 kHz due to the parasitic capacitance of Zener diode circuit including gyrotron. In order to solve these lacks of controllability and high frequency modulation of APS, the existing APS is replaced by a new type of APS and it is tested for KSTAR 170 GHz gyrotron system. This paper presents the new APS design and characteristics and the test results for 170GHz gyrotron in KSTAR ECH system.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.