EPJ Web of Conferences
Volume 67, 2014EFM13 – Experimental Fluid Mechanics 2013
|Number of page(s)||5|
|Published online||25 March 2014|
A new method for fluid input into a hybrid synthetic jet actuator
Institute of Thermomechanics, AS CR
a Corresponding author: firstname.lastname@example.org
Published online: 25 March 2014
A new principle of flow rectification for hybrid synthetic jet actuators is introduced in this paper. As is well known, the flow rectification can be best accomplished by means of fluidic diodes. Novelty of the present study are fluidic diodes with two mutually opposed nozzles. Interaction between the periodic jet flows from the nozzles causes a difference between the blowing and suction strokes, resulting in a particularly efficient rectification effect. The distance between the nozzle exits as well as the oscillation frequency were the parameters, which were varied during hot-wire measurements. The combination of those parameters achieving the highest volumetric effciency was identified.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.