EPJ Web of Conferences
Volume 67, 2014EFM13 – Experimental Fluid Mechanics 2013
|Number of page(s)||4|
|Published online||25 March 2014|
Influence of volume working fluid and ambient temperature on cooling efficiency of loop thermosyphon
University of Žilina, Department of Power Engineering, Univerzitná 1, 01026, Žilina, Slovakia
a Corresponding author: firstname.lastname@example.org
Published online: 25 March 2014
Article deal with research of device for electrical component cooling used to heat transfer working fluid phase change. Amount of heat flux transferred by thermosyphon loop depend from amount working fluid and from ambient temperature where is heat removal too. In article is described proposal construction of thermosyphon loop, comparisons of his cooling efficiency if is filled 40 % and 50 % volume of working fluid and condenser (ambient) temperature from 20, 30 up to 40 °C at heat load from 40 to 360 W.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.