EPJ Web of Conferences
Volume 67, 2014EFM13 – Experimental Fluid Mechanics 2013
|Number of page(s)||8|
|Published online||25 March 2014|
Numerical simulation of radial compressor stages with seals and technological holes
1 University of West Bohemia, New Technologies - Research centre, 306 14 Pilsen, Czech Republic
2 ČKD KOMPRESORY a. s., R&D Department, 190 02 Prague 9, Czech Republic
a Corresponding author: email@example.com
Published online: 25 March 2014
Article describes numerical simulations of an air flow in radial compressor stages in the NUMECA CFD software. Four different radial compressor stages were solved in this article. During the tasks evaluating the stepped and straight impeller seals and technological holes influence on working characteristics and the flow field was observed. Also the CFD results comparison with results from the empiric design tool is described.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.