| Issue |
EPJ Web Conf.
Volume 180, 2018
EFM17 – Experimental Fluid Mechanics 2017
|
|
|---|---|---|
| Article Number | 02060 | |
| Number of page(s) | 7 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201818002060 | |
| Published online | 04 June 2018 | |
https://doi.org/10.1051/epjconf/201818002060
Experimental investigation and numerical modelling of 3D radial compressor stage and influence of the technological holes on the working characteristics
University of West Bohemia in Pilsen, New Technologies Research Centre, Univerzitní 2732/8, 301 00 Plzeň, Czech Republic
* Corresponding author: mata@ntc.zcu.cz
Published online: 4 June 2018
The article deals with a description of results from research and development of a radial compressor stage with 3D rotor blades. The experimental facility and the measurement and evaluation process is described briefly in the first part. The comparison of measured and computed characteristics can be found in the second part. The last part of this contribution is the evaluation of the rotor blades technological holes influence on the compressor stage characteristics.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.