Issue |
EPJ Web Conf.
Volume 269, 2022
EFM19 – Experimental Fluid Mechanics 2019
|
|
---|---|---|
Article Number | 01036 | |
Number of page(s) | 8 | |
Section | Contributions | |
DOI | https://doi.org/10.1051/epjconf/202226901036 | |
Published online | 24 October 2022 |
https://doi.org/10.1051/epjconf/202226901036
Numerical modelling and experimental investigation of the influence of selected geometric elements on the working characteristics of radial compressor stages with prismatic blades
1 University of West Bohemia in Pilsen, New Technologies Research Centre, Univerzitní 2732/8, 301 00 Plzeň, Czech Republic
2 RotMach s.r.o., Rybná 716/24, 110 00 Praha 1, Czech Republic
* Corresponding author: mata@ntc.zcu.cz
Published online: 24 October 2022
The article deals with a description of basic results of research of radial compressor stages with 2D e.g. prismatic rotor blades. The experimental facility and the measurement and evaluation process are described briefly in the first part. The second part of this contribution is the numerical simulation and evaluation of the influence of the technological holes in the 2D rotor blades to compressor stage characteristics. The influence of the labyrinth seals clearance on the working characteristics can be found in the last part. The comparison of measured and computed values is presented and discussed.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.