| Issue |
EPJ Web of Conferences
Volume 75, 2014
JEMS 2013 – Joint European Magnetic Symposia
|
|
|---|---|---|
| Article Number | 06002 | |
| Number of page(s) | 4 | |
| Section | 6. Magnetic recording, sensors and microwave devices | |
| DOI | https://doi.org/10.1051/epjconf/20147506002 | |
| Published online | 03 July 2014 | |
https://doi.org/10.1051/epjconf/20147506002
Characterization of integrated inductors with one and two YIG layers for low-power converters (1 W)
Université de Lyon, F-42023, Saint Etienne, France, Université de Saint Etienne, Jean Monnet, F-42023, Saint Etienne, France, LT2C, F-42023, Saint Etienne, France
a Corresponding author: stephane.capraro@univ-st-etienne.Fr
Published online: 3 July 2014
These last years, the miniaturization of electronic components allows to increase the number of equipment. Consequently, the realization of integrated inductors with high inductance and low-cost manufacturing is highly desirable. The objective of our work is the characterization of inductors with one or two magnetic layers in order to integrate these components in low-power converters (1W). Extracted parameters show a strong increase of the inductance either by simulation or by measurement according to the magnetic thickness layer. For inductance with two magnetic layers, inductance value is higher when the bottom YIG layer thickness is higher than the top YIG layer thickness.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.