EPJ Web of Conferences
Volume 92, 2015EFM14 – Experimental Fluid Mechanics 2014
|Number of page(s)||5|
|Published online||06 May 2015|
CTU Optical probes for liquid phase detection in the 1000 MW steam turbine
CTU in Prague, Department of Energy Engineering, Technická 4, Prague 6, 166 07, Czech Republic
a Corresponding author: firstname.lastname@example.org
Published online: 6 May 2015
The aim of this paper is to introduce the measurement capacity of a new generation of CTU’s optical probes to determine the liquid phase distribution in steam turbines and other energy systems. At the same time the paper presents the first part of the results concerning output wetness achieved through the use of experimental research performed with the probes in a new low pressure (LP) part of the steam turbine 1000MW in the Temelin nuclear power plant (ETE). Two different probes were used. A small size extinction probe with a diameter of 25mm which was developed for measuring in a wider range of turbines in comparison with the previous generation with a diameter of 50mm. The second probe used was a photogrammetric probe developed to observe the coarse droplets. This probe is still under development and this measurement was focused on verifying the capabilities of the probe. The data processing technique is presented together with yielded examples of the wetness distribution along the last blade of the 1000MW steam turbine. The experimental measurement was done in cooperation with Doosan Škoda Power s.r.o. (DSP).
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.