| Issue |
EPJ Web of Conferences
Volume 92, 2015
EFM14 – Experimental Fluid Mechanics 2014
|
|
|---|---|---|
| Article Number | 02105 | |
| Number of page(s) | 5 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/20159202105 | |
| Published online | 06 May 2015 | |
https://doi.org/10.1051/epjconf/20159202105
Experimental study of effect of stenosis geometry on flow parameters
CTU in Prague, Faculty of Mechanical Engineering, Department of Fluid Dynamics and Thermodynamics, 16607, Prague 6, Czech Republic
a Corresponding author: O.Vesely@fs.cvut.cz
Published online: 6 May 2015
A stenosis is a narrowing in a tubular organ or structure. In medicine, vessel stenosis poses health risks for people. In this work, experimental investigations of pressure loss coefficient for varying stenosis eccentricity and shape were performed. Five models of different geometry were studied; all models were stenosis of 75 % area reduction. The flow conditions approximate physiological flow. The measuring range of Reynolds number was from 130 to 2730, measured values of pressure loss coefficient were from 12 to 20. The steady experimental results indicated that static pressure loss coefficient is affected by the shape of stenosis, but it was affected more significantly by the eccentricity. Visualization experiments have been performed in Polycarbonate models.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.